Delivery Time:within 25 working days
Certification:CE, QS, CCC

61852 Deep Groove Ball Bearings For Construct Machines With Steel Pressed Cages

Feature:

They are the most typical rolling bearings with extensive applications. The raceways in both of the rings are in arc groove form, which can carry radial and axial load in double directions. They can be applied in situations where high-rotating speed and low noise and low vibration are required.

Cages:

Deep groove ball bearings generally use pressed cages of steel sheet or brass cages. When the outer diameter is less than (inclusive)400mm, they use pressed cage with steel sheet. When the outer diameter is bigger than 400mm, they use brass cages.

Applications:

Can be found in automobiles, machine tools, motors, instruments, construct machines, railway vehicles, agricultural machines and various other special machines

Types:

Basic type, With snap ring groove on the outer ring(-N), With one shield(-Z) on one side or two shields(-2Z) on both sides, With one seal(-RS)on one side or two seals(-2RS)on both sides.

Model	Old Model	Boundary dimensions (mm)	Basic load ratings (KN)	Limiting speed (r/min)	Weight (KG)
d	D	B	Rsmin	dyc_Cr	stc_Cor	Grease	Oil
61852	1000852	260	320	28	2	100	135	1600	2000	4.9
61952	1000952	260	360	46	2.1	210	269	1500	1900	15.1
752	752	260	370	46	2.1	210	270	1200	1500	17
16052	7000152	260	400	44	3	236	310	1400	1800	21.5
6052	152	260	400	65	4	294	372	1400	1800	28.3