Main Products: Drilling Rig Machine
Premium Tungsten Carbide Elastomer Sealed TCI Tricone Bit, Drilling Rig Component
Negotiable /Set
Min.Order:1 Set
Quick Details View All >
Xuanhua Jinke Drilling Machinery Co.,Ltd
Business Type: Trading CompanyMain Products: Drilling Rig Machine
Metal - Face Sealed Bearing TCI Tricone Bits Rock Drilling Tricone Bit For Rotary Drilling
Pneumatic Breaker Pneumatic Instrument Manufactured Rock Drills For The Construction B47
Sullair Portable Rotary Compressors / Movable Double Screw Air Compressor
Low Operational Cost High Fuel Autonomyportable Atlas Copco Air Compressors
Full Hydraulic Operated Drilling Rig Machine With Dth Hammer Drilling AK-60
0.4~0.5 Mpa Jack Hammers Air Leg Pneumatic Rock Drill For Ifferent Rock Formations YT24
Product Details
Cutting Structure
The durability of premium tungsten carbide insert is improved with new formulas and new techniques for insert bit.
Gauge Structure
Multiple gauge protection with gauge trimmers on the heel of cone, tungsten carbide inserts and hardfacing on the shirttail increases gauge holding capability and bearing life.
Bearing Structure
High precision bearing with two thrust faces. Ball lock the cone.Hardfaced head bearing surface. Cone bearing inlaid with friction-reducing alloy and then silver-plated. Abrasion resistance and seizure resistance of the bearing are improved.
Seal and Lubrication
Premium O-ring, Optimal seal compression and curved seal structure can enhance the seal performance. The pressure compensator system and advanced grease can greatly increase the lubricating reliability.
Product Application
It can receive high WOB in the conventional drilling. It is suitable for various formations by matching cutting structure with different tooth shape, tooth density and tooth exposure height.
Recommended Drilling Parameter
|
IADC |
WOB (KN/mm) |
RPM (r/min) |
Applicable Formations |
|
417/437/ 447/415/435 |
0.35~0.9 |
150~70 |
Very soft formations with low compressive strength and high drillability, such as clay, mudstone, chalk, gypsum, salt, soft limestone, etc. |
|
517/527/515 |
0.35~1.0 |
140~60 |
Soft formations with low compressive strength and high drillability, such as mudstone, gypsum, salt, soft limestone, etc. |
|
537/547/535 |
0.45~1.0 |
120~50 |
Soft to medium formations with low compressive strength, such as medium, soft shale, medium soft limestone, medium soft sandstone, medium formation with harder and abrasive interbeds, etc. |
|
617/615 |
0.45~1.1 |
90~50 |
Medium hard formation with high compress strength, such as hard shale, limestone, sandstone, dolomite. etc |
|
637/635 |
0.5~1.2 |
80~40 |
Hard formations with high compressive strength, such as sandstone, limestone, dolomite ,hard gypsum, marble, etc. |
|
Note: The upper limits of WOB and RPM in above table should not be used simultaneously. |
Contact Supplier
You May Like
New Products
Recommended Products
Find Similar Products By Category
Facebook
X
Pinterest
Linkedln