MODEL

GX-640

GX-500

GX-400

GX-300

Mechanism/
Driving method

Friction feed/Digital control servo motor

Maximum
cutting area

Width: 1575 mm (62 in.)
Extend: 1626 mm (64 in.)
Length: 24998 mm (984-1/8 in.)

Width: 1195 mm (47 in.)
Length: 24998 mm (984-1/8 in.)

Width: 1000 mm (39 in.)
Length: 24998 mm (984-1/8 in.)

Width: 737 mm (29 in.)
Length: 24998 mm (984-1/8 in.)

Acceptable
media widths

Min. 130 mm (5-1/16 in.)
Max. 1842 mm (72-1/2 in.)

Min. 90 mm (3-1/2 in.)
Max. 1372 mm (54 in.)

Min. 90 mm (3-1/2 in.)
Max. 1178 mm (46 in.)

Min. 50 mm (2 in.)
/Max. 915 mm (36 in.)
(50 to 540 mm (2 in. to 21 in.), 582 to 915 mm (23 in. to 36 in.))

Width of material that can be cut off

0 to 1778 mm
(0 in. to 70 in.)

0 to 1270 mm
(0 in. to 50 in.)

0 to 1067 mm
(0 in. to 42 in.)

0 to 812 mm
(0 in. to 32 in.)

Tools

Special blade for CAMM-1 series

Maximum
cutting speed

During cutting: 850 mm/sec. (in all directions) During tool-up: 1202 mm/sec. (in 45 direction)

Cutting speed/Brade force

10 to 850 mm/sec. (in increments of 10 mm/sec.)/20 to 350 gf

Mechanical resolution

0.0035 mm/step (0.000137 in./step)

0.0125 mm/step (0.000492 in./step)

Software resolution

0.025 mm/step (0.000984 in./step)

Distance accuracy*1

Error of less than 0.2% of distance traveled, or 0.1 mm (0.00394 in.), which is greater

Repetition accuracy*1*2*3

0.1 mm or less

Interface

Serial (RS-232C-compatible), USB (Rev 1.1)

Replot memory

2 MB (buffer size: 8 MB)

Power supply/Power consumption

AC 100V to 240V ±10% 50/60Hz 1.2A/Approx. 100W

AC 100V to 240V ±10% 50/60Hz 1.1A/Approx. 95W

Dimensions with stand

2155 (W) x 727 (D) x 1113 (H) mm
(83-1/4 (W) x 28-5/8 (D) x 43-13/16 (H) in.)

1602 (W) x 727 (D) x 1113 (H) mm
63-1/16 (W) x 28-5/8 (D) x 43-13/16 (H) in.)

1407 (W) x 727 (D) x 1113 (H) mm
(55-3/8 (W) x 28-5/8 (D) x 43-13/16 (H) in.)

1144 (W) x 727 (D) x 1113 (H) mm
(45-1/16 (W) x 28-5/8 (D) x 43-13/16 (H) in.)

Weight with stand

64 kg (141.1 lb)

55 kg (121.2 lb)

51 kg (112.4 lb)

44 kg (97 lb)

Operating temperature

5 to 40°C (41 to 104°F)

Operating humidity

35% to 80% (non-condensing)