Delivery Time:Within 30 days
Certification:ISO9001:2008;CE;Gost-R

EHM-1B professional design types of Slurry Pumps for mining

Introduction:

EHM Series slurry pump is mainly using for handing strong abrasive, high density slurries and low density, high head slurries in the metallurgical, mining, coal, power, building material and other industrial departments etc.

Structure:

The frame plates of this kind of slurry pump have replaceable wear-resistant metal liners. The impellers are made of wear-resistant metal. The frame plate liner and impeller for EHM slurry pump are adoptable of hard metal only.

Bearing assembly of this kind of slurry pump use cylindrical structure, adjusting the space between impeller and front liner easily, being removed completely when being repaired. Bearing assembly use grease lubrication.

The shaft seal of this kind of slurry pump could use the packing seal, expeller seal and mechanical seal. The discharge branch can be positioned at intervals of 45 degrees by request and oriented to any eight positions to suit installations and applications.

Here are the drive types, such as V belt drive, gear reducer drive, fluid coupling drive, and frequency conversion drive devices.  The pump of this type may be installed in multistage series to meet the delivery for long distance.

Application:

This kind of slurry pump mainly applies in coal washer processing, handling with the fine ore and tailings in metal mine, handing combined bottom and fly ash in a thermal power station etc. .

Performance Chart:

Pump Model	EHM Series	Impeller Dia.
Allowable Max.Power	Clear Water Performance
Capacity Q	Head H(m)	Speed n(r/min)	Max.Eff. η%	NPSH (m)
m3/h	l/s
EHM-1B	15	12.6-28.8	3.5-8	6-68	1200-3800	40	2-4	152
EHM-1.5B	15	32.4-72	9-20	6-58	1200-3200	45	3.5-8	184
EHM-2C	30	39.6-86.4	11-24	12-64	1300-2700	55	4-6	214
EHM-3C	30	86.4-198	24-55	9-52	1000-2200	71	4-6	245
EHM-3D	60
EHM-4D	60	162-360	45-100	12-56	800-1550	65	5-8	365
EHM-4E	120
EHM-6E