UT-2177,10/100TX to SC Fiber Optic Transceivers, Industrial Media Converter-1 TCP /IP Port

Specifications:
Performance parameters
1. The quality optical integration module provides excellent optical and electrical properties. It ensures reliable data transmission and long working life.
2. It supports both full-duplex and semi-duplex modes, and it also possesses auto-negotiation capability.
3.10Mbps and 100Mbps adjust automatically. No manual adjustment required.
4. Electrical interface supports fully automatic cross-identification. No manual operation required.
5. Built-in store and forward mechanism, cache 128KB, supports multiple protocols.
6. Support maximum transmission data packets of 1600bytes
7. Conform with carrier-class operating standards, average 50,000+ no-error operation hours.
8. Power supply: DC5V Input 1A
9. SC fiber optic interface (ST or FC interface optional)

 

Appearance Description
DIP Switch:
● When DIP switch 1 is set to “OFF”, switch and switch are not in operation mode. Switch 2 and 3 can only be configured when Switch 1 is set to “NO”.
● When DIP switch 2 is set to “OFF”, the electrical interface opearting rate is at 100M; when set to “NO”, the interface operating rate at 10M.
● When DIP switch 3 is set to “OFF”,the electrical interface is at full-duplex operation status; when set to “NO”,the interface is at semi-duplex operation status.
● When DIP switch 4 is set to “OFF”,LFP function is banned; when set to “NO”,
LFP alarm function is then activated. LFP function is used to detect the connection between optical and electrical interfaces. When remote optical or electrical interface is disconnected, it notifies and disconnect the corresponding local optical or electrical interface, and the indicator will be off. This helps technicians to quickly identify the point of connection error.

 

Side panel view

Support the IEEE802.3 Ethernet, IEEE802.3 U Ethernet protocol standard

1. The technical parameters: