UT-2377, 1310nm Single-mode Optical Fiber to Serial Converter, 60KM, Pole-shaped Connector
Negotiable /Kilogram
Min.Order:1 Kilogram
UT-2278SM/ MM, RS-232 / RS-485 / RS-422 Single-mode / Multi-mode Fiber to Serial Converter
UT-277SM/MM, Custom 460KBPS, RS-232 / 422 / 485 to optical media Fiber to Serial Converter
UT-2671, Custom Fiber Optic Transceivers, ST, FC and Auto adapt 10Mbps / 100Mbps
UT-2671, 10 / 100TX to SC Industrial Media Fiber Optic Transceivers -1 TCP/IP port
UT-2177,OEM 128KB Fiber Optic Transceivers, 100Mbps,10Mbps, Full Duplex / Half Duplex Mode
UT-2177, Fiber Optic Transceivers, Single-mode 20km, 40km, 60km and SC, FC, ST Interface
UT-2377, 1310nm Single-mode Optical Fiber to Serial Converter, 60KM, Pole-shaped Connector
Specifications:
Interface |
Supports RS-232/RS-485/RS-422 interfaces. |
Asychronic transmission |
Point-to-point with a rate as high as 460KBPS |
Transmission distance |
60,000 meters for single-mode |
Working temperature |
-40℃ to +85℃, relative humidity from 5% to 95% |
Working wave length |
1310nm(single-mode) |
Electric interfaces |
RS-232: pole-shaped connector RS-485/RS-422: pole-shaped connector |
Fiber interface |
FC interface(SC/ST can be customed) |
RS-232 interface features |
Standard RS-232 three line interface ±15KV(anti-static), ESD protection, maximum rate of 115.2KBPS Input voltage DC9-48V@200mA |
RS-485/RS-422 interface features |
Self-adaptive interface technology enables the self adaptation of rate regulation from interface, no switch needed, and the ±15KV(anti-static) ESD protect supports as much as 32 points of polling. And 600W surge protection each line for RS-422 and RS-485 interfaces. |
Connector and signal
Connector (PIN) |
Signal |
RS-422 Full-duplex |
RS-485 Half-duplex |
1 |
T/R+ |
Send(A+) |
RS-485(A+) |
2 |
T/R- |
Send(B-) |
RS-485(B-) |
3 |
RXD + |
RXD(A+) |
N/C |
4 |
RXD - |
RXD(B-) |
N/C |
5 |
TXD |
RS-232(Send) |
|
6 |
RXD |
RS-232(RXD) |
|
7 |
GND |
RS-232(GND) |
|
8 |
VCC |
Power input(DV9-48V) |
|
9 |
GND |
GND |
|
10 |
ETH |
ETH |
Description:
Being a multi-function fiber modem in support of asynchronism RS-232, RS-485 and RS-422 communication interface, UT-2377 is the best choice for the connection from remote terminal unit (RTU) to host of Supervisory Control and Data Acquisition (SCADA). It supports multiple asynchronism communication protocols including RS-232, RS-485 and RS422, and it also supports a combination of two of the RS-232, RS-485 or RS-422 interfaces as well as both of the working modes, i.e. two-line (half-duplex) RS-485 and four-line (full duplex) RS-422. The ability to support RS-485 mode for data TXD or SD sending control greatly improves its compatibility with various kinds of software besides a sharp simplification of control method. Various kinds of fiber connection between asynchronism serial interfaces are supported by UT-2377 fiber modem. Both half duplex and full duplex communications through fiber between two asynchronism interface devices are supported w