Flyin-Optical Switch, which is an ideal Component for OADM, OXC, system monitoring and protection.

1x2 Multi-Mode Mechanical Fiber Optic Switch

Features,

1. Unmatched low cost

2. Low insertion loss

3. Latching or non-latching

4. High channel isolation

5. Highly stable and reliable

6. Epoxy-free optical path

 

Applications

1. Optical Signal Routing

2. Optical Network

3. Proection/Restoration

4. Configurable Optical Add/Drop

5. Transmitter and Receiver Protection

6. Network Test Systems

Parameter	Min	Typical	Max	Unit
Operation Wavelength range	1310± 40 or/and1550± 40	nm
lnsertion Loss			0.7	dB
Polarization Dependent Loss (PDL)		0.05	0.1	dB
Cross Talk	30			dB
Return Loss	35			dB
Repeatability			± 0.03	dB
Switching Time			10	ms
Operating Voltage	5.0	VDC
Durability	107	cycles
Optical Power Handing			800	mW
Operating Temperature	-10		+75	° C
Storage Temperature	-40		+85	° C
Switch Type	Latching or Non-Latching
Fiber Type	MM 50/125 or 62.5/125um fiber
Package Dimension	(L)46x(W)13.4x(H)11	mm

 
Electrical Drive

Switch Type	Optical Path	Electrical Drive	Status Sensor
Pin1	Pin10	Pin5	Pin6	Pin2-3	Pin3-4	Pin7-8	Pin8-9
Latching     Non-latching	1-2	+V Pulse	GND	N/A	N/A	close	open	open	close
1-3	GND	+V Pulse	N/A	N/A	open	close	close	open
1-2	N/A	N/A	N/A	N/A	close	open	open	close
1-3	GND	+V Pulse	N/A	N/A	open	close	close	open

 

Ordering information
Option	Wavelength	Fiber type	Pigtail type	Fiber length	Connector
L=Latching N=Non-latching	1470nm 1490nm 1510nm … … 1590nm 1610nm	1=Bare fiber 2=900um  loose tube 3=2mm cable 4=3mm cable	1= 50/125um 2=62.5/125um S=Special	1=1m 2=2m 3=special	0=None 1=FC/APC 2=FC/PC 3=SC/APC 4=SC/PC 5=ST 6=LC