Full auto pull up baby diaper machine
Full auto machine for both making pull up baby diaper and normal baby diaper accroding to clients different demand .

Design production speed : 400pcs / min ( accroding to M size )

Actual production speed : 200-250pcs /min ( according to M size )

Power supply : 3 phase , 380V , 50HZ or as request

Power : about 160kw ( excluding glue machines and air compressor )

Machine size : about 23*7*3.5m (excluding glue machines , the exact size according to actual demand)

Machine weight : 35T ( excluding stack machine , glue machines , air compressor )

Machine colour : as request

Finished products : pull up baby diaper with 2 sides of right and left elastic tapes , acutal products according to clients demand .

Pass products : ≥ 97%.

Compress air : 0.6-0.9Mpa

Products requirements :

Finished products specification : according to sample or designs ( confirmation by 2 parties ) , it can make S,M,L,XL size

Finished products structure : bottom tissue paper +wood pulp mixing SAP + upper tissue paper + non woven blue core + 2 sides non woven + middle non woven +leak guard elastic rubber band + laminating non woven back sheet +leg elastic rubber band + 2 sides of elastic right and left tapes + velcro button

Diameter of raw materials : back sheet : φ 800mm , non woven and up and down tissue paper : φ 1000mm , others : φ 800mm

Machine control :

A. The PLC-motion controller - variable frequency motor control system.

B. color touch screen was put in the security door frames of the equipment to facilitate production operations.

C. The main machine speed , the pulp feed rate, polymer quantity, tick waste, material feeding and stopping and knife roller can be set and controlled on the touch screen

D. the speed of the machine , shift productiona , total production,downtime records and failure all will be displayed on the touch screen .

E. The transition of feeding and stopping materials automatically / manual can be set independently , You also can change the mterials manually by bottons that are on the bottons station

F. temperature control with temperature controller

 

The drive of whole machine through the synchronouscontrolling of 3 motors , the variable frequency motor controls unwinding to change mumbers conveniently .

This machine with deviation-corrected system total 11 groups and with monitors and tick waist system .

 

A. All raw materials, feed off the automatic detection and alarm shutdown.

B. Elastic-off material automatically detected.

C. The core material, non-woven on both sides of the intermediate non-woven, diversion layer non-woven upper toilet paper, the underlying composite membrane connector automatically.

D. Bilateral posted about the flexibility, the lack of automatic detection of bilateral magic button and tick waste.

E. electrical fault automatically shut down and automatically show the cause of the stored fault history.

F. Cotton core compaction winding automatic detection and alarm shutdown.

G. waste excluded the use of pneumatic auto-part manual control, and discharged by the guide plate.cy motor .