Delivery Time:Standard Models: 15 – 25 work days. Special Order: when confirming the configuration, usually in 30
Certification:CE & ISO9001:2000
350℃ Oil Circulation Mold Temperature Controller Unit for Compression Casting
AODE temperature control units are used to preheat a process to the desired operating temperature by engaging the unit\'s electric immersion heater and recirculating the water in the system. Upon reaching the operating temperature the AODE can continue to add heat or becomes a cooling device by exchanging a small amount of recirculated water with cooling water from an external source. The cooling water is precisely metered into the system by the cooling valve.
Oil Temperature Control Units circulate high temperature heat transfer fluid through the process application for temperature control. ADDC&ADDM Series temperature control units offer temperature control from 25°Cto 350 °C
Applications:
Temperature control unit is used to control the temperature of various industrial fields,
such as following:
l The temperature control of the precise injection molding
l The temperature control of extrusion forming equipment.
l The temperature control of rubber forming machinery.
l The temperature control of cast film production lines.
l The temperature control of cable extrusion production lines.
l The temperature control of tyre production lines.
l The temperature control of quadriplex extrusion production lines.
l The temperature control of three-roller or four-roller rolling equipment.
l The temperature control of the dies for the compression casting of magnesium, aluminum, zinc alloy.
l The temperature control of the roller pressing applied in rubber, plastic and leather industries.
l Crude oil heating of the oil sinks on tankships.
l The temperature control of the paper-making industry.
l The temperature control of printing and dyeing industry and drying.
l The temperature control of chemical engineering and reaction kettles.
l The temperature control of RHAM superheated water high-gloss traceless injection molds.
Specifications:
SPECIFICATIONS 1
|
Model |
Unit |
ADDC-18 |
ADDC-36 |
ADDC-48 |
|
Temp.Range |
ºC |
25ºC~ 350ºC |
||
|
Temp.Control Accuracy |
ºC |
PID±1ºC |
||
|
Power supply |
AC3∮380V (3Phase+Earth) |
|||
|
Heat transfer medium |
Oil |
|||
|
Cooling Method |
Indirect Cooling |
|||
|
Expansion Tank Capacity |
L |
25 |
25 |
30 |
|
Heating capacity |
kw |
9*2 |
12*2 |
20*2 |
|
Pump Power |
kw |
0.55 |
1.1 |
2.8 |
|
Pump Flow② |
L/min |
35 |
60 |
100 |
|
Pump Pressure |
kg/cm² |
5.0 |
5.5 |
6.8 |
|
Max power consumption |
kw |
19 |
26 |
52 |
|
Special function |
Oil return by pump reversal |
|||
|
Alarm Funct |
