Delivery Time:Standard Models: 15 – 25 work days. Special Order: when confirming the configuration, usually in 30
Certification:CE & ISO9001:2000

Microprocessor Heater Circulation Process Mold Water Temperature Controller Units

AODE temperature control units are used to preheat a process to the desired operating temperature by engaging the unit\'s electric immersion heater and recirculating the water in the system. Upon reaching the operating temperature the AODE can continue to add heat or becomes a cooling device by exchanging a small amount of recirculated water with cooling water from an external source. The cooling water is precisely metered into the system by the cooling valve.

Water Temperature Control Units circulate water through the process application for temperature control. Sentra Series temperature control units offer temperature control
from 15°Cto 180 °C

Applications:

Temperature control unit is used to control the temperature of various industrial fields,

such as following:

l  The temperature control of the precise injection molding

l The temperature control of extrusion forming equipment.

l The temperature control of rubber forming machinery.

l The temperature control of cast film production lines.

l The temperature control of cable extrusion production lines.

l The temperature control of tyre production lines.

l The temperature control of quadriplex extrusion production lines.

l The temperature control of three-roller or four-roller rolling equipment.

l The temperature control of the dies for the compression casting of magnesium, aluminum, zinc alloy.

l The temperature control of the roller pressing applied in rubber, plastic and leather industries.

l Crude oil heating of the oil sinks on tankships.

l The temperature control of the paper-making industry.

l The temperature control of printing and dyeing industry and drying.

l The temperature control of chemical engineering and reaction kettles.

l The temperature control of RHAM superheated water high-gloss traceless injection molds.

Specifications:

Model	Unit	AEWT-10
Temp.Range	ºC	Into the water temperature: +15~180ºC
Temp.Control Accuracy	ºC	PID±1ºC
Power supply		AC3380V 50HZ(3Phase+Earth(5M))
Heat transfer medium		Water
Cooling Method		Direct Cooling
Heating capacity	kw	9
Horsepower of pump	HP	1
Pump Flow	L/min	95
Pump Pressure	kg/cm²	12
Max power consumption	kw	12
Alarm Function	Open phase/Water depletion/Excess temperature/Overload/Reverse turn/High voltage
Cooling Water Pipe	INCH	1/2(adjustable)
Circulating Oil Pipe	INCH	3/8*4(adjustable)
Size (L*W*H)	mm	700*360*845
Weight	kg	75

Remarks:

1. We reserve the right to make changes to the above specifications without notification.

2. Some special specifications could be custom-manufac