Delivery Time:After deposit 15-20 days
Certification:ISO9001-2008
Single-side adjusted Climbing Formwork with high level of standardization and universality
Descrition:
Introduction
Single-side climbing formwork DXB-180 & DXB-240 are based on the DP-180 & DP-240 system,
which are in similar structure. DXB-180 & DXB-240 are mainly used in concrete pouring of dam, pier,
guy anchor, concrete protecting wall, tunnel, underground workshop and so on. Because the concrete
lateral pressure is entirely supported by anchor system and bracket, the wall-through tie-rods and
additional reinforcement are not needed. The construction is easy, rapid and economical; the surface
of the concrete is smooth. They are perfect formwork systems for single-sided walls.
|
DXB180 |
DXB240 |
The Adjustment Of Inclination(DXB-180 system can be inclined by adjusting pull-push prop.
The maximum angle is 30°)
Characteristics
1. The lateral pressure of the concrete is entirely supported by the anchor system. Hence, wall-through
tie-rods are not needed, and the finished concrete is perfect.
2. The formwork can move backward entirety, which will be convenient for work.
3.Couplings are used for connecting the formwork units to make sure they keep a straight line.
4. The connecting components have a high level of standardization and universality.
5. The formwork can stick to the concrete tightly, which means dislocation and leakage can be avoided.
6. The formwork can be adjusted horizontally or vertically whenever it is necessary.
7. DXB-180 system can be adjusted to lean forward or backward, and the maximum inclination is 30°.
