1.       Usage: automatic line carving, drilling and milling edge for circuit board;

2.       Maximum working size: 300mm×300mm;

3.       Working mode: 2.5 d double-sided processing mode;

4.       Control handle is made up of ARM + FPGA of embedded control system, there is double USB interface in control handle, realizing master-slave USB communication model, that is, as the main USB device, directly read U disk data, as the slave USB device, communicate with the computer, which can completely work off the computer;

5.       All module driving mode, three step motor modules + driving chip united to drive XYZ axis moving;

6.       Casting fuselage, Y axis moves driving beam arm move, in sculpture and drilling process, no displacement of circuit board;

7.       Random configuration of processing data auxiliary processing software, data directly into the machine without any external software;

8.       With function of X, Y, Z axis hardware and software limit;

9.       High power spindle motor, higher processing precision, with memory function without electricity, no worries about outage;

10.     Handle human-computer interface: 128 * 64 dot matrix liquid crystal display + 18 multi-function keys, with simple and intuitive operation;

11.     Processing precision: ±0.05mm;

12.     Repeat precision: 0.01mm;

13.     Minimum processing line width: 4mil;Minimum line gap 6 mil above;

14.     Suitable drilling flower: 0.3mm~3.175mm Drilling handle: 3.175mm;

15.     Suitable milling cutter: 1mm~3mm Cutter handle: 3.175mm;

16.     Processing speed: 0~3m/min(actual-time adjustable);

17.     Spindle motor: 800W frequency conversion motor  The highest speed 40000 revolves/min;

18.     Step motor: 35W four phase step motor*3;

19.     Shaft driving mode: entire advanceding screw driving;

20.     Spindle movements itinerary: 60mm;

21.     With mating PC control software, lifetime free upgrades;

22.     Working power: AC220V/50Hz 1000W;

23.     Overall dimension: main engine: 580mm×610mm×550mm;

24.     control cabinet: 400mm×250mm×590mm;

25.     Net weight: 105KG.