2000 Gauss Wet Magnetic Separator   introduction:

The 2000 Gauss Wet Magnetic Separator can separate raw materials with different magnetic rigidities.The   2000 Gauss Wet Magnetic Separator are available in cyclic design with process vessel diameters smaller than 3mm. Magnetic Separator is one kind of efficient equipment for processing fine, feebly magnetic minerals, such as hematite, limonite, wolfram, ilmenite, and tantalum-niobium, etc. In recent years, it is also more and more applied in purifying quartz, feldspar and nephline. Its magnetic system is a ring-shape chain closed magnetic circuit with energizing coils made of copper tube and cooled internally by water. Grooved plates made of magnetic conductive stainless steel are used as magnetic matrix.

2000 Gauss Wet Magnetic Separator working principle:

When the raw materials flow into the tank body of the 2000 Gauss Wet Magnetic Separator , firstly, the flowing direction of the raw materials is the same as the rotary direction of the magnetic drum, the iron magnetite materials are attracted to the surface of drum. This is the first separation. In the second step, the flushing water below flush the raw materials back for the second separation. This time the flowing direction of the raw materials is opposite to the rotary direction of the magnetic drum. Then along with the rotation of drum, the iron magnetite materials on the surface of drum will finally leave the magnetic field and fall to the ore concentrate box under gravity. Also, the flushing water above helps to flush the iron magnetite into the ore concentrate box. The weak magnetic and non-magnetic materials can not be attracted and will flow to the discharge pipe for tailings.   

Main Technical Parameter  of  2000 Gauss Wet Magnetic Separator :

Producing processing of  2000 Gauss Wet Magnetic Separator

1. Stainless steel drum out of 2000 Gauss Wet Magnetic Separator

2. The technician is installing the magnetic blocks seriously.

3. Put the complete magnetic blocks into the stainless steel drum, then give a chassis.

4. After QC Dept workers inspect, now a beautiful appearance and good quality magnetic separator is creat.

5. Deliver picture: our worker load the machine carefully.