Aluminum Alloy Mobile Portable Rechargeable Power Banks For Cell Phones, Laptops, GPS, PSP

Dual USB Universal Rechargeable Power Bank

Suitable for all communicate and digital devices with 5V input
DUSL USB PORT: CAN CHARGE TWO DEVICES IN THE SAME TIME
This is the latest multi-function digital mobile power, uses the Japanese superb & efficient
boosting technique and battery to protect IC. Built-in fully voltage identification clip, it can
automatically identify a variety of digital products, voltage and current, and thus charge
effectively to stop false charging. Refined aluminum alloy shell, it looks small and unique. By the
built-in high-capacity 5000mAh rechargeable Lithium battery, it has many advantages:
suitable for a wide rage, long life, cost-effective…etc. So it can recharge your mobile phone,
digital camera, PDA, PSP, MP3, MP4, iPod, DV and other digital items.
 

Product Specification

【Item No.】RS PB-908
【Battery Capacity】6600mAh 24Wh
【Input Current】DC4.8~5.4V 1A~2A(max)
【Dual Output】5V 1A & 5V 2.1A (for iPad)
【Charge Retention】more than 5000hrs
【Dimension】123*65.5*17mm
【Gross Weight】162g
【Colour】White, Black

All accessories:

Operation Guide

Thank you for using our products. This item is suitable for the Communication Digital Devices with
DC-5V Input. In order to let you experience the product swimmingly, pls read the manual carefully it
before using.

General Description:

1) It’s a latest multi-function digital mobile power, also a perfect combination of battery and
charger, colorful, fashionable and streamlined appearance.
2) Lightweight aluminum alloy shell design, mix with all kind of adapter ingeniously, can meet you
low-key & luxury taste style
3) It’s small and easy to carry, do not have to go out with a lot of heavy and complex charger
4) Easy and wide to use
You can be very convenient to recharge your mobile phone or other 3C consumer product any
time and anywhere: such as PDA, iPod, MP3/MP4, digital camera, GPS, PSP, electronic
dictionaries, Bluetooth headset etc.
5) Additional, your 3C consumer product can be going on working in charging.
 

Operation Instruction

We have a power adapter to charge 908 (Pls use the Micro USB Pin to charge it)

★WHEN USE 908 TO CHARGE YOUR DIGITAL DEVICES:
Under active standby, 908 is in hibernation states, and its LCD screen is also turned off.
Start 908 in 2 ways:
※Start Mode 1: Automatic Identification Mode
PN-908 in standby, when your digital devices access through the standard USB port, 908 can
identify automatically, then 5V input will be allowed;
Meanwhile, the LCD display with blue backlight will be turned on, and shows the power and
port status.

1. Use one USB port (2.1A output), the LCD display status:

2. Fully charged, showing the full grid:

3. When charging supply accesses though the Micro USB port, and your digital device accesses
simultaneously though the standard USB port, charging supply will give a priority to the standard USB port to charge your

digital device.

★ABOUT ITS POWER-OFF AND DISCONNECTION
In the discharge state, 908’s power-off and disconnection have the following 2 ways:

※Way 1: Automatic Identification Mode
In the discharge state, when your digital device is removed from the standard USB port for 15
seconds (or your digital device full charged after 15 seconds), 908 can identify automatically,
then turn off the 5V input, and close the LCD display.
※Way 2: on/off Manual Mode
In the discharge state, long press on/off switch can control 908’s shutdown and disconnection
directly, at the same time the LCD is closed too.
 

★CHARGE RS PB-908

When 5V charging supply accesses though the Micro USB port, it’s charging the built-in battery,
and the LCD displays the charging status.
1. In the state of charge, the power grid showing dynamic display:

2. Fully charged, showing the full grid:

3. When charging supply accesses though the Micro USB port, and your digital device accesses
simultaneously though the standard USB port, charging supply will give a priority to the standard USB port to charge your digital device.

When your digital device is fully charged, or it’s removed away, charging supply goes into
charge the built-in battery.
★WORKING STATUS OF THE BLUE BACKLIGHT
RS PB-908 enters work state from standby, the blue back light is lit,