Model No.:NIC-K11
Product Origin:China
Brand Name:NICBOND
Price Terms:FOB Guangzhou
Payment Terms:T/T, L/C
Certification:
Description:Features and benefits: 1) Can be applied onto damp surface 2) Strong bond strength to substrate of concrete and render; the active element permeates into capillary pores of the substrate and forms a compact waterproof layer 3) After the slurry membrane is dried, tile adhesive can be used directly onto the waterproof layer 4) Can be used either on interior or exterior wall and floor 5) Water resistance and good durability 6) Water vapor permeability 7) Water based, so non toxic 8) Easy to spread Application scope: 1) To be executed polymer modified cementitious waterproofing ceramic (JC/T89T-2001) 2) Apply for damp-proof and waterproof of industrial building structure with potential microcrack and damp environment Surface preparation: 1) The surface should be sound, clean and free from any contaminants such as oil, grease, concrete curing agent 2) Obvious pore and crack must be plastered with repair mortar, and sharp edge must be removed Instruction: 1) The mixing ratio: 25kg powder: 18kg additive: 0 - 1kg of water 2) Pour a suitable amount of additive into a clean container and slowly add the powder into liquid with constant stirring until the lump-free mixture is achieved; add a little water if necessary for easy workability 3) Keeping interval mixing to avoid deposition 4) The second coat is applied after the first layer is dried and spread vertically; the third coat is applied when necessary Dosage: The thickness of the painted film shall be 1.0 - 1.2mm; 20 - 25sqm/set Note: The above-mentioned dosage is for the case when the substrate is even. Precautions: 1) Do not use fan to fasten drying 2) Other coating should not be done until the waterproof layer is entirely dry and cured 3) Do not use the product with the temperature below 0°C or in the condition that is very damp 4) Do not mix the cured slurry with water and reuse it Shelf life: Unopened powder bags can be stored for up to 12 months in a cool/dry environment. Liquid additive can be stored for up to 6 months. Packing: 1) 25kg powder+18kg additive/set, 5kg powder+3.6kg additive/set 2) 25kg powder+13kg additive/set, 5kg powder+2.6kg additive/set