AC 100 - 240 V / 50 - 60 Hz High Flow Water Filters for Clean and Softening

TECHNICAL SPECIFICATION TABLE

PRODUCT PURPOSE

ECO Laundry is an environmentally friendly appliance intended for using in a residential washing machine.

ECO Laundry is designed to work with your washing machine, mixed active oxygen and silver ions into the water.The processed water can wash clothes cleanly and kill bacteria on clothes without leaving any residual detergent.

ECO Laundryhas the main functions as below:

Sterilization and disinfection;

Decontamination and purification;

Clean and softening;

Energy conservation and environmental protection

The operation of ECO Laundry is easy and convenient. As long as you install ECO Laundry properly, you simply need to operate your washing machine following manufacturer’s operation instructions. ECO Laundry will start working automatically when the washing machine starts to work, and it will automatically turn off when the washing machine stops operation.

USE & SAFETY CONSIDERATION

Before using, please read the User’s Manual carefully.

Disconnect ALL power before servicing.

Do not operate the unit with the cover removed.

Maximum water inlet pressure is 75psi.

Use the supplied new hose when connect the ECO Laundry unit to your washing machine. You should replace any existing washing machine hose that is more than 2 years old, with a new one.

To prevent leakage caused by back-flow from the washing machine, do not leave your water hose disconnected. Simply turn the water off at the valve / faucet on the wall, leaving the hose connected.

Use a soft cloth dampened with water. Do not clean your ECO Laundry with harsh chemicals, abrasives or cleansers.

Do not mount the ECO Laundry unit vertically or at an angle.

ECO Laundry is designed for residential use only and is not intended for use in a commercial or industrial setting.

ECO Laundry can work normally in the temperature category 0℃~78℃, without components breakdown.

①Water inlet

②Water Outlet

③Flow Switch   

④Venturi

⑤Static Mixer  

⑥PCO Cell                                           

⑦Control Module   

⑧Oxidizing Module

⑨Mounting Holes  

⑩Power Supply

Replacement Parts

INSTALLATION REQUIREMENTS

Electrical Requirements

ECO Laundry requires 120Volt 60Hz power on a 15amp fuse or Circuit Breaker.

A dedicated electrical circuit, equipped with an approved GFCI outlet, is recommended for supplying power to your ECO Laundry.

NEVER use an extension cord or a power adapter other than the one provided with ECO Laundry.

Water Requirements

Water pressure of 10 to 75psi is required to correctly operate your ECO Laundry.

To avoid the possibility of water damage (i.e. a hose leak) it is recommended that you always turn off the water supply valves/faucets when the washing machine is not in use.

Water quality may affect the performance of your ECO Laundry. If you have water quality concerns, such as high content