Specifications: Flexible neon wire, also called electroluminescent(el) wire is the new generation product in global lighting and display industry. Wrapped by colorful plastic tube on its surface, it appears similar to common phone wire, emitting light along its entire length but without any heat radiation. It consumes much lower power, it was developed and put into production by professional institute of Chinese academy of science, thus opening a new era in lighting and display field featured with energy saving, environmental protection and health. Patent no. Zl011333442.1 product characteristic 1. Homogeneous light along the entire length with wide range of vivid color, great and comfortable to be seen in darkness.2. Low energy consumption, environmentally friendly, safe: Wide range voltage application, suitable for both AC and DC, non-toxicant and no harm to human being.3. Flexible, can be bent, twisted, stretched and spliced, brightness will not be affected, easy to stall, no need of any professional background.4. Comes in entire length, animated and colorful lighting effect can be achieved by controlling relating electric circuit.5. Be fixed on decoration surface directly by using transparent adhesive tape, glue, clip, thread, nail, plastic card etc. Application fields1. Indoor advertisement: Written pattern for display window, door, furniture, wall, ceiling etc.2. Vehicle decoration: Internal and external car, ship etc. Instrument, meter or data display.3. Safety sign and indication: Street, stairway, corridor, doorplate, exit and outdoor temporary danger zone etc.4. Others: Industrial gadget, toys, arts an crafts, sports items, clothing, electrical appliance, military equipments etc. Technical application instruction For flexible neon wire(elwire)patent no.: Zl01251151. X Tech data Power0.4-0.8 w/M brightness 5-100 CD/m2 Standard type1.0-5.0 mm operation current 6-15ma average application lifetime 5000 hrs shape round, quadrate, with drape Maximum length 100 M weight4-18 g/M Operation temperature under zero 40 to 60 centigrade degr color red, blue, green, orange, whit application requirements inverter/driver be matched input: DC 3v,6v,9v,12v,24v, AC 220v,110voutput: Voltage 90 -150v frequency 800 - 2000hz connecting opration instrucrtion 1. Strip the plastic layer, exposing the lighting layer and two fine copper wire(thesecond electrode ) then remove half of lighting layer, exposing the first copper electrode2. Separate the two copper electrodes, solder them with two electrodes of common wire respectively, wrap each of the joint with shrinkable tube, make sure the two soldered joints are not touching to avoid short circuit.3. Cover the soldered joints with shrinkable tube again, keep it insulating and humid - protective with glue.4. EL wire joint method is same as the above.