HDMI Over One 100m cat5e/cat6 Extenders(HD BaseT),hdmi extender, hdmi extender to 100m by cat5e

The HDMI Extender over cat5e/cat6 is a tool for extending your HDMI signal over long distances to a compatible display. It is designed to convert HDMI signal to standard HDBaseT signal and transmit by Internet cable. It also supported Transfer Bidirectional Infrared control signal together with the HDMI signal, so you can control the Source in the Sink side which is 100 meters outside, also you can control the Sink in the Source side which is 100 meters outside using the HDMI Extender.

Features

1.   One pair as a full functional module, no need for setting.

2.   Use single UTP LAN cable (CAT-5E/6) to substitute HDMI cable to achieve long distances transmission.

3.   UTP cable termination follows the standard of IEEE-568B.

4.   Transmission distance reaches up to 100 meters under the video format of 1080P and up to 70 meters under 4K x 2K.

5.   HDMI V1.4 supported.

6.   HDCP compliant.

7.   Full HD support: 1080p@60Hz@48 b/pixels, 3D and 4K x 2K

8.   Transfer Bidirectional Infrared control signal together with the HDMI signal.

Package

1.  HDMI Extender Transmitter ------------------------- 1PCS

2.  HDMI Extender Receiver  --------------------------- 1PCS

3.  IR Transmitter------------------------------------ 2PCS

4.   IR Receiver  ------------------------------------ 2PCS

5.   12V DC Power Supply adaptor ---------------------- 1PCS

6.   Operation Manual  ------------------------------- 1PCS

Specifications

1.     Frequency Bandwidth                              10.2Gbps (single link)

2.    HDMI Transmitter Input/Output Ports    1x HDMI Female port/1 x CAT6

                                                                             1x IR Transmitter/1x IR Receiver

3.    HDMI Receiver Input/Output Ports         1 x HDMI Female port/1 x CAT6

                                                                             1x IR Transmitter/1x IR Receiver

4.   Power Supply                                              DC 12V 2A

5.   ESD Protection Human Body Model:      ± 8kV (air-gap discharge)

                                                                             ± 4kV (contact discharge)

6.   Dimensions (mm)                                     65(W) X 100 (D) X 25 (H)

7.   Weight                                                         200g x 2

8.   Operating Temperature                          0°C ~ 40°C / 32°F ~ 104°F

9.   Operating Temperature                          0°C ~ 40°C / 32°F ~ 104°F

10.  Storage Temperature                            -20°C ~ 60°C / -4°F ~ 140°F

11.  Relative Humidity                                   20 ~ 90% RH (Non-condensing)

12.  Power Consumption (Max)                  20W

Operation controls and Functions

Transmitter

1.   DC IN: Plug the 12V DC power supply into the unit.

2.   IR OUT: Chanel 1 IR Transmitter.

3.   IR IN: Chanel 2 IR Receiver.

4.   HDMI IN:HDMI Input port.

5.   HDMI Signal OUT:Standard HDBaseT signal output port

6.   LINK LED: This red LED illuminate when the Transmitter and Receiver is connected with LAN cable.

Receiver

1.  DC IN: Plug the 12V DC power supply into the unit.

2.  IR IN: Chanel 1 IR Receiver.

3.  IR OUT: Chanel 2 IR Transmitter.

4.  HDMI OUT:HDMI Output port.

5.  HDMI Signal IN:Standard HDBaseT signal input port

6.  LINK LED: This red LED illuminate when the Transmitter and Receiver is connected with LAN cable.

NOTE: One of Transmitter or Receiver is powered by DC12V@2A,the other do not need power.