Pourign Mixter for Autoclave aerated concrete line is designed to pour the rated lime powder,cement,slurry aluminum paste into the mixer,evenly and equally mix to the mould containe.The different kinds of Autoclave aerated concreteraw materials and slurry flow into this mixer for wholly mixing, Then pour into the mould. This mixer is necessary for pouring. The mixing Cycle is about 8 minutes. The percentage of raw materials: Fly ash (or sand): Lime: Cement: Gypsum = 70: 20: 7: 3, with few aluminum powder. Structure feature: The Autoclave aerated concretemachine mix to form strong vortex by propeller, in order to fully break the envelope of the quicklime particles to make uniformly mixed. At the same time, the pouring boom can adjust the height in the pouring process to prevent the splash.Stationary pouring machine is the special equipment for making 50,000-300,000m3 Autoclaved aerated concrete blocks, matched with the electric ferry push car. Producing at high speed and high efficiency, mainly mix the slurry,cement,quicklime,plaster and Aluminum paste suspended liquid which are poured into the silos according to a certain ratio.The movable pouring machine is suitable for the Autoclave aerated concrete line below 50,000m3.By working moving and returning, the pouring speed is fast, the occupancy area is small and easily operated. At the same time, the pouring height can be adjusted by rising and falling.