Curtain slitting machine mainly does the slitting job of big pieces of fabric,with the PLC as controlling core and ultrasonic as the cutting enegy medium.The operator control machine by GUI(graphic user interface). Totally,machine is highly automatical,with the function of auto adjustment of the fabric edge and its precision,

 We uses the Ultrasonic Cutting technology on this machine which is higher in quality than traditional blade and lazer cutting.Ultrasonic blades were ranged in a line which allowed a big fabric running between blade and horn, and the Ultrasonic energy will,sended by the blade ,will make the big pieces into narrow stripes. 

Ultrasonic make the edge smooth,and the edge adjustent system make the edge parall.

 Feeding system

Namely the machinisim that feed fabric to the cutting part,which is controlled by motor that is controlled by controlling core.you can change the feeding speed through GUI.

The horizontal position is adjusted by GUI,too,(See below “Movement test interface”).

There’s a “edge adjusting motor” on right side of feeding machinisim(The cutting edge may become in disorder with some unknown reason,and the what edge adjusting system avoid)there’s a edge adjusting inductor inside,once the fabric horizontally moves,the inductor will get the signal and send it to PLC,then the PLC will give a signal out to make the “edge adjusting motor” work to avoid the movement. Adding a handing wheel on the left side of feeding frame is to adjust the parallel between feeding and collecting frame.

There is a dividing ruler on the left side of feeding frame. When  you adjust handing roller and the dividing ruler shows 5.Theoretically speaking, feeding frame and collecting frame are paralleled.

Please keep clean of feeding bar in case the fabric may be dirty.

Technical Parameters: