CGF8/8/3type PET bottle Liquid Filling Machine three in one machine is one of advanced models which is our company combines international advanced self-filling process and technology developed specifically for mineral water, pure water and other non-gas beverage filling installation. Liquid filling machine, Liquid filling equipment, Liquid filling plant, Liquid packaging machine, Liquid filling plant Constitutes of the equipment: Washing part Filling part Capping part Gas power part Machine body __electric part Electric box part Work platform Main transmission Chain box and pass in and out arc board Frame Characters of equipment: 1 Direct connection technology between air conveyor and in-feeding starwheel is applied to replace in-feeding screw and conveying chain to ease bottle changing process with only to change few parts. Newly-designed bottle-separating grippers are assembled to starwheel. 2 We adopts Neck-hanging technology in bottle transportation. Instead of traditional starwheel, we use neck-hanging gripper to make bottle-size-changing easily, without equipment height adjustment, only few parts need to be adjusted 3 Specially-designed rinser grippers which are made of stainless steel are firm and endurable, with no contact to screw part of the bottle to prevent second pollution. 4 High-speed, easily-cleaned filling valves with big flow volume are equipped with well CIP system and control system to rinse the equipment thoroughly. 5 Splint of starwheel using twist descending way to simplify the process of bottle-size-changing. Only need to change arch board and starwheel, within ten minutes Parameters: Production: 1000-3000 b/h Bottle type: Bottle diameter Φ 50 ~ 100 mm; Bottles of 150 ~ 320 mm high Cap type: Standard plastic cap Washing pressure: 0.18~0.25Mpa Washing water: 0.5T/h Washing time: 3 seconds Air Pressure: 0.4Mpa Air consumption: 0.4m3/min Main Motor: 1.5KW Hopper motor: 0.18KW Washing pump: 0.37KW Into pump: 0.55KW Weight: 2100kg. Dimensions: 1780*1680*2200(mm).