Brief introduction SPJ-6301 can be used as degreaser, penetrant, dispertant, emulsifier in industrial cooling water system and boiler water system. The product has good stripping effects, and also can be widely used to improve water quality and clean equipment in metal processing, paper industry, and textile processing. The product can effectively control the growth and reproduction of bacteria, fungi, yeast and algage. It will kill the cell by changing the nature of cell-membrane, killing the cell-wall and plasmalemma. The product is can not be used with anionic surfactants, but can mix use with a certain mount of non-ionic surfactant. The product is an environmentally product. Its active ingredients can depredate well. The product has the advance of non-toxic, good compatibility and low using cost. Technical parameters Appearance Colorless or light yellow sticky liquid Odor No special odor Water-soluble easily pH (1% water-solution) 6.0±2.0 Density (g/cm3, 20OC) 1.10±0.10 Usage The produce is dosing periodic, normal dosage is 50~100mg/L. After adding the product, there will be some foams bring by the contaminations. The foams should be removed immediately or it will deposition to the bottom. Users can increase the dosage when pollution seriously. When used as slime remover, the dosage should be 100~300mg/L. Our engineers can service on-site to confirm the right dosage and add locations. The dosage for special fields should ask technical staff for advice. Packing and storage The product is packed in 25L or 200L plastic drums, or packed according to customers’ requirements. It should be kept in cool, ventilated warehouses. Guaranty period: two years. The product is acid, so it can’t mix-use with strong alkaline, oxidizing, reducing substances. Users should wear personal protective equipment such as: rubber gloves, goggles, gas masks and chemical aprons when use the product. The product should be sealed when not in use.