RF-Fractional CO2 Laser
Negotiable /Set
Min.Order:1 Set
Treatment Principle :
RF-CO2 fractional laser provides brand new laser resurfacing treatment. Comparing to conventional CO2 laser, RF-CO2 laser source can shot steadier and more even laser. During the treatment, hundreds of evenly and orderly nano-level micro-laser can be applied on the target skin with accurate controllable software. The laser coverage of each RF-CO2 fractional micro-laser is only tens of micro meters, enable operator control the coverage, depth and layers of laser to target epidermis or dermis easily and exactly, while leaving other skin area well and safe. RF-CO2 fractional laser will generate heat effect on skin. The Photochemical reaction will improve collagen regeneration, which will accelerate skin self recovery, after the recovery of target skin, more whitening and smooth skin can be achieved.
Advantage :
a. True micro ablative skin resurfacing, your first option for ablative laser treatment
b. Charring and gasifying tissue, large area stanching, available for surgical operation.
c. Three laser output :
SuperPulse/ContinuousWave/Fractional Scanning, Multi pattern optional
d. US-imported RF-CO2 laser source, more even and steady laser.
e. Various and customized setting for all skin type, all area of body.
f. Proven and instant results
g. Fast treatment without downtime
Treatment Scope :
a. full facial resurfacing, improve new skin generation.
b. Wrinkle removal, tighten aging skin
c. Acne scar improvement
d. Scald recovery, surgical scar recovery
e. Color spot/pigmentation improvement
f. Photo damage skin recovery
g. Begign neoplasm and melanotic nevus removal
Technical Datas :
General Specification |
Wavelength |
10.6?m, far-infrared laser |
Scan Mode |
Laser Energy |
5-45mj, step value 5mj |
Figure Option |
1. Square or rectangle, min 33mm; max 2020mm, step value 1mm. 2. Round, min 3mm (diameter), max 20mm (diameter), step value 1mm. 3. Ellipse, min 38mm, max, 1520mm, step value 3mm. |
|
Energy Repeat |
1-5 (When increasing energy repeat, laser energy is increased synchronously, max total energy 225mj.) |
|
Dot Density |
36/49/64/100/144/225 dots in 1cm2 |
|
Mode |
Normal, scan sequentially line by line. Random, scan randomly, to decrease thermal accumulation. This function is not available for rectangle. |
|
Normal Mode |
Laser Energy |
1-30W, step value 1W |
Ultra Pulse(Super) |
1. Average power: 1w~30w; 2. Pulse frequency: 300Hz~950Hz optional |
|
Pulse |
1. Average power: 1w~30w; 2. Pulse duration: 0.1s~1s optional |
|
Continuous Wave |
1w~30w |
|
Repeat |
1. Average power: 1w~30w; 2. Pulse duration: 0.1s~1s optional?off time?1ms |
|
Dimension |
50cm60cm100cm |
|
Weight |
50Kg |