Package includes:
* 1 x PE-16 Transmitter
* 1 x PE-16 Receiver
* 1 x Receiver to 6.35mm Jack Sync Cable (for Studio Light/Strobes)
* 1 x Receiver to 3.50mm Jack Sync Cable (for Studio Light/Strobes)
* 1 x 2.50mm Jack to PC Sync Cable (Transmitter to Camera)
* 1 x Trigger safety seat
* 2 x Transmitter 23A 12V Batteries
* 1 x PE-16 User Manual
 

Warranty:
12 Month Manufacturer Warranty
 

Features:
* Use global free-change frequency 2.4GHz, and 16 selectable channels.
* Maximum sync speed comes to 1/200s
* Trigger the flash light through hot-shoe, and trigger the studio light through Receiver to 6.35mm Jack Sync Cable or Receiver to 3.50mm Jack Sync Cable.
* Supports multiple outdoor flash light and studio lights.
* Maximum operating distance comes to 100 meters.
* Transmitter battery: 1*23A 12V battery (2 pcs included)
* Receiver battery: 2*AAA batteries (not included)
 

Functions:
A.Trigger speedlite
  After mounting the transmitter on the hot shoe of camera, then mount the speedlite on the hot shoe of the receiver, and lock it.Then you can focus, and the speedlite will be waked up.When focusing is finished, release the shutter, the speedlite will be flash synchronously.

 

B.Trigger Studio strobe
  First, link one head with screw of the sync cable to the receiver, then fix the receiver near the studio strobe with trigger safety seat, and link the sync cable to the studio strobe.
  Second, install the transmitter on the hot shoe of the camera.When shooting, the studio strobe will flash synchronously with the camera.

 

C.Play as remote shutter release
  If need to achieve this function, extral shutter release cables will need to buy according to your camera.
1. Plug one head with screw of the shutter release cable into the output socket of the receiver.
2. Fixed the receiver well on the camera hotshoe holder or near the camera, and plug the other end of the shutter release cable into the camera shutter socket
3.Switch on the camera and receiver, at this time, the transmitter is played as the shutter remote controller.
4.Half press the shutter release button of transmitter, and camera starts to focus;Press the shutter release button completedly, the camera starts to shoot.

 

D.Control several flashes
    If need to achieve this function, extral receivers and connecting cables will need to buy, also need to adjust all the recivers and the transmitter channel switches at same status;can control several speedlites or several studio strobes as well as speedlites and studio strobes combination, after start to shoot , all the flashes will be fired synchronously.
1.Fix the speedlite on the receiver hotshoe holder directly.
2.Connect the studio strobe with connecting cable
Set up the transmitter on the camera hotshoe holder, press the camera shutter release butoon completedly, all the studio strobes and speedlites are fired synchronously.