Delivery Time:According to customers' need.
Certification:CE
Max 5TΩ Insulation Resistance Measurement YH 510

1.Measurement of Insulation Resistance for HP Devices (Transformer, Electric Cable, and Electric Machines, etc)

2.Built-in High Power Voltage Generator (250V ~ 5kV Adjustable)

3.Auto Computation and Display of PI (Polarization Index) and DAR (Dielectric Absorption Rate)

4.Stepped Voltage Test, Temperature Compensation, Temperature Measurement, and Leak Current Measurement

5.Data Storage and Upload Function

Features

Test Voltage and Insulation Resistance Measurement in Broad RangeTest voltage ranges from 250V to 5kV, in 25V stepped setup, and able for measurement of 5TΩ insulation resistance in maximum.

Supports Various Insulation Judgments

Data Storage and Upload Function

Able to manually store 100 data, automatically record 10 groups of data (360 measurement points in maximum for each data group), and automatically record date and time.

Carrying Case

Hard carrying case adaptable to field application is adopted.

Chargeable batteries can be used at the same time

Able to be loaded with 2# batteries and chargeable batteries at the same time, and when capacity of one group of batteries is insufficient, it can be switched to another group for further use.

Temperature Measurement	10～70°C±1.5°C
Display	LCD Display, with Back Light
Hot Line Voltage AC, DC Frequency	50～750V ±50～±1000V 50Hz/60Hz
Display Refresh Rate:	1 Time/s(0.25 T/s during use of average value function)
Output Voltage Monitoring:	2 Times/s
Voltage Measurement:	4 Times/s
Temperature Measurement:	1 Time/s
Analog Bar:	2 Times/s

MAIN FUNCTIONS

Measurement of Insulation Resistance and Leak Current

Test Voltage: DC250V～5.00kV, Test Insulation Resistance 0 –5TΩ; Max Test Current 1mA

Able to display insulation resistance, leak current, PI, DAR, and measurement time.

Stepped Voltage Test

Test voltage is gradually increased to measure variations of insulation resistances and leak currents under different voltages.

Two types of stepped voltage values are optional, and measurement time can be selected for respective stepped stages.

Display of PI (Polarization Index) and DAR (Dielectric Absorption Rate)

Able to automatically measure parameters of PI and DAR.

Measurement of

Precision of Measurement: ±5％rdg.±5％dgt

Data Storage Function

Able to manually store 100 groups of data, and also able to automatically record 10 groups of data, with each group able to store 360 measurement points in maximum.

Data Uploading Function

Able to upload the store data into PC through USB interface, to be formed into graphic charts and to be printed for filing, and also able to set up and modify measurement parameters at PC end.

Supports USB2.0 (Full Speed)

Parameter Indicators

Environmental Range of Temperature and Humidity: 0～40°C, 90%rh below (non-condensed)

Battery: 6# Battery x 6 | Ni-MH Chargeable Battery, 7.2V

Max Rated Power: 15W

Time for Continuous Use: Dry batter can last 5 hours and chargeable battery can last 9 hours, under the condition of 5kV generation, ports disconnected and back light closed.

Max Rated Voltage to Ground: 600Vrms(CAT IV)，1000Vrms(CAT III)

Insulation Level: AC7000V 15s between electrical loop and casing.