AUTOPS130 Series Water Pump
Applications and installation
The Automatic booster system consists of a water pump, an airtight pressure tank, and a pressure switch. The specially designed structure makes it better appearance and performance. The pressure tank with a non-toxic rubber membrane, or called pressure vessel, has been pre-filled with air pressure of about 0.12 Mpa before leaving the factory. These systems give suitable mains water pressure as required by modern domestic appliances and industrial applications, and will ensure enough water to supply all user outlets.
Pumps should be installed in a covered area, protected against the weather.
Operating limitations
Liquid temperature up to 60℃
Ambient temperature up to 40℃
Total suction lift up to 9m
Continuous duty
Construction features
Pump Body: Cast Iron
Impeller: Brass
Motor housing: steel
Mechanical Seal: Carbon / Ceramic / Stainless Steel
Shaft: 45# Steel / Stainless steel
Insulation: Class B / Class F
Protection: IP44 / IP54
Thermal protector (if required)
Technical Data:
|
Model |
Power |
Ampere(V) |
Speed |
Q.max |
H. max |
Suct.max |
Pipe dia |
N.W. |
L×W×H |
|
|
HP |
kW |
1-220 |
||||||||
|
PS-126 |
0.5 |
0.37 |
1.6 |
2850 |
35 |
30 |
9 |
25×25 |
7.8 |
208×145×215 |
|
PS-130 |
0.5 |
0.37 |
1.6 |
35 |
30 |
9.4 |
310×230×290 |
|||
