This hot press machine consists of host department ,oil cylinder assembly ,hydraulic perssure station and steam system ,electronic control system component mainframe.
1.The main frame adopts superior international steel plate with a simple structure and resonable design high rigidity ,strength and good bearing capacity .
2.Full range of model and specification ,customers can appoint what you like .
3.The hydraulic pressure control system adopts imported hydraulic parts ,with rapid compression and excellent in efficiency.
4.Our equipments is the main machine for the production of plywood ,particle board and decorative sheet.
5. Low motor power and quick ,power-free falling of hot platens save power consumption and decrease production cost .
6.The foundation is simple ,with low investment .
7.Hot press is the main equipment for plywood,blockboard,decorative and fancy plywood,etc.
MAJOR TECHNICAL PARAMETERS
| ITEM NO | DESCRIPTION | UNIT | SPECIFICATION |
| 1 | PRESSURE | KN | 7500 |
| 2 | HOT PRESSBOARD BREATH | (MM0 | 2700*1370*52mm |
| 3 | LAYERS | LAYER | 16 |
| 4 | OPEING | (MM) | 78 |
| 5 | PLUNGER DIAMETER | (MM) | 280 |
| 6 | PLUNGER NO | PIECE | 2 |
| 7 | PLUNGER STROKE | (MM) | 1170 |
| 8 | CLOSING TIME | S | 30 |
| 9 | HEATING MEDIUM | SATURATED STEAM | |
| 10 | LOW PRESSURE PUMP FLOW | L/MIN | 230 |
| 11 | LOW PRESSURE PUMP PRESSURE | MPa | 16 |
| 12 | HIGH PRESSURE PUMP FLOW | L/MIN | 36 |
| 13 | HIGH PRESSURE PUMP PRESSURE | MPa | 31.5 |
| 14 | TOTAL MOTOR POWER | KM | 15 |
