HCM-120T light side pressure machine

The machine consists of principal machine ,side press machine ,cylinder assembly,hydraulic station ,steam piping entering and exiting system and electrical cabenit and so on .

Principal machine: is a framed tructure,made up of upper tray ,medium tray ,lower tray ,has high strength and good rigidity .Hot plate is between the upper and medium tray ,the serpentine inside the hot plate drilling heats the hot plate evenly by the steam .the feet and stepped plates on both side of hot plates can support the hot plate and guid the plate .

Lateral pressure device:It is fixed on both side of framework,tightening the framework.

Lateral compressor :It control advancing and retreating function.

Master cylinder :assembly fixed on the lower tray connected by circular flanges and bolts,to ensure tightness of the cylinder.

1.This machine is widely used and can make several kinds of man-made boards,such as veneer sheets,chipboards ,plywood and insulating boards ,with different pressure.

2.with advantages of small pressure loss,large flow,low failure rate,and convenient maintenance,the domestic advanced cartridge value structure has been employed in hydraulic system .

3.The machine works in boths manual and automatic manners .

4.it is good in frame ,safe in operation,etc

MAJOR TECHNICAL PARAMETERS