Features

Miniaturization of Rockwell hardness tester, the smallest model weighs only 0.8kg and the operation is similar to that of a micrometer.

The testing principle and accuracy comply with ISO 6508 and ASTM E110, tested by National Institute of Metrology with error less than 1.5HRC, same as the bench type.

The instrument is composed of tester and bench stand, can be used on table or on site in the factory.

Can test many kinds of thin, small, long and irregular parts that cannot be tested by the bench type.

Well suits for testing the workpieces with small supporting surface.

Traceable standard hardness block.

Indenter inspected with standard Rockwell hardness tester.

Test force calibrated with load cells directly traceable to national

secondary benchmark.

Main Technical Parameters

Standard Package

1 Tester
1 Bench stand
1 Diamond indenter (120°cone)
2 Ball indenters (Φ 1.588mm)
1 Flat anvil
1 V anvil
3 Standard Rockwell hardness blocks
1-2 Extensions
1 Carrying case

Optional Accessaries

120°diamond cone indenter

Carbide ball indenter (1.588mm, 3.175mm)

Steel ball indenter (6.35mm, 12.7mm)

Standard test blocks (HRA, HRC-High, HRC-Medium, HRC-Low, HRB)

Raised spot anvil

Slim raised spot anvil (for small supporting surface workpieces)

Concave cylindrical anvil

Convex cylindrical anvil (for tubing,

curved sheets)

Anvil for testing ball (for steel ball)

Spare magnifier

Model Selection

Remarks: The first number in the model specification means the opening width(inch), the second number means the opening depth(inch), if only one number it means the width and depth are the same value.