cut to length machine
it can produce different kinds of pipe,including round ,square and rectangle pipes

Cut to length machine,  cut to length roll forming  machine,   slitting machine,

Cut to length forming machine

Model 6~20*2500mm high speed cut to length line
 Technical Parameter
1. Raw material: plain carbon steel ,HSLA
2. Thickness of coil: 6~20mm
3. Performance: δs=280---550Mpa
4. Width of mother coil: 1500~2500mm
5. Out diameter of mother coil: ≤2200mm
6. Inner diameter of mother coil : 508,610,762
7. Max weight of mother coil: 10T
8.Fixed length requirement: roughness degree (according to state standard)
9.Length tolerance:±1.5mm/2000mm
10.Diagonal tolerance:±2mm/2000mm

Equipment configuration
Loading car Hydraulic double cones uncoiler Frame style Drawing , straight peen and spading equipment srectifying

device leveling machine, tail-plate conveyer, cut to length machine,Main conveyer,

collection table, hydraulic system, electronic control system

 

Technical parameter
1. De-coiler
Max loading capacity:10T
2.Hydraulic Double Cones uncoiler
Max loading capacity: 10T
3.Frame style Drawing , Straight peen and Spading mechanism
It is composed of frame style hydraulic pressing arm, pulling roller, hydraulic Straight peen, and hydraulic Spading mechanism, etc
cycloidal-pin wheel reducer: BWED 163-289-11 kw
4.Seven rollers preliminary leveling Machine
Raw material: 40Cr, intermediate frequency quenching HRC55°
5.Rectifying Device
It is made up of workbench, guild rod, moveable plate, vertical rollers, supporting plate, etc.

Vertical rollers; 2 pairs, 40Cr, heat treatment HRC54°
6.Main leveling Machine
The number of riding wheel: 3 channels each (up and down), total quantity is 33 items
The specification of riding wheel : 300*300mm, 40Cr( raw material) , heat processing HRC52
Power of leveling device: DC speed adjustable motor 200KW match reducer ZS1250 and distributor box, universal joint.
Leveling speed: 0~~12m/min (adjustable)
7. Tail-plate conveyer
It is made up of frame, beam, bearing block, upper and lower rollers, lifting &pressing device, motor, chain wheel, chain, etc.
Raw material: 40 Cr, intermediate frequency quenching HRC48~52°
Power of transmission: cycloidal-pin wheel reducer 11 kw
8.Cut to length Machine
Model: QC20Y-25*2500mm
Maximum thickness of steel plate: 25mm
Number of strokes: 6~8times/min
Motor power: 55KW
9.Conveyer
It is made up of frame, beam, bearing block, upper and lower rollers, lifting &pressing device, motor, chain wheel, chain,etc.
Raw material: 40 Cr, intermediate frequency quenching HRC48~52°
Power of transmission: cycloidal-pin wheel reducer 15 kw
10.    Run out table
Size: 1800*8000mm