Product  Name:1mil Polyimide Film 6051

1mil Polyimide Film 6051

In 1960's, polyimide film was invented in laboratories. After then, this gold-colored film has influenced the development of electrical and electronic industries greatly. For more 35 years, polyimide film has been proved as an excellent flexible material of choice in applications involving very high, 400°C (752°F), or very low, -269°C (-452°F) temperature extremes. To use the polyimide film means reducing volume and weight of the electrical appliances while retaining the same output or increase the capacity without increasing in frame size. It's excellence performance and properties such as chemical resist, high tensile strength, high voltage, often make it becomes the first or only choice for most  electrical designers and researchers.

Application of our polyimide film

·   FPCB

·   wire and cable insulation

·   formed coil insulation of traction motors,

·   motor slot liners 

·   magnet wire insulation

·   transformer and capacitor insulation

·   alternators, generators

·   downhole pumps

·   magnetic and Pressure Sensitive Tapes and tubes

Varieties of Polyimide Film

Polyimide film (H Type)

Polyimide film is a good H grade insulating material with Good property of insulation and mechanism.

Thickness: 1mil (0.025mm) ~ 7mil (0.175mm)

Width: 0.3in (8mm) ~ 40in (1000mm)

Length: 2000m max

Working temperature: –60 °C ~ +250 °C

Polyimide film with FEP coating (FH Type)

The FH film is a heat sealable film which is made by Polyimide film with one side or double side FEP coated.

Base film thickness: 1mil(0.025mm) ~ 2mil (0.05mm)

Thickness of FEP coating: 0.1mil (0.0025mm) ~ 0.5mil (0.0125mm)

Width: 0.3in (8mm) ~ 20in (508mm)

Polyimide film tapes (PSA tape)

The polyimide tape is made from polyimide film with silicone or arylic adhesion coating. It is widely used in high temperature shielding such as the golden finger protection during PCB pass through the solder oven, surface protection, diecutting, etc.

Normal Polyimide tape (silicone or acrylic adhesion)

Polyimide tape with liner

ESD Tape (anti-static tape)

Printable Polyimide film (tape)

The printable polyimide film is made from polyimide film with a special white coating. Which is used for Printed circuit board labels. It can withstand process temperature as high as 250°C

Not just a pretty amber colored film

Polyimide (PI) film not only can fully meet any general requirements of a wide variety of industrial applications, but it also possess the unique characteristics of high tensile strength, high-wear tolerance, high-temperature tolerance, and anti-corrosion.  PI completely meets the industrial design requirement of modern consumer's electronics, while at the same time, has always been a standard electrical insulation material for decades. It is the high temperature insulation material properties that enable PI film to have absolute competitive advantage over all others.

Polyimide, abbreviated as PI, is a polymer material with imide group. The reaction mechanism involves the addition of diamines and dianhydrides to form polyamic acid, abbreviated as PAA, and then react into polyimide after high temperature, imidization and dehydration.

Because of the excellent thermal, mechanical and chemical properties, PI is always the best choice when specifying high performance polymer materials, especially for applications in electronic and integrated circuit industries that have strict materials specification. PI is in the position of key materials, such as high temperature tape, IC passivation coating, LCD alignment layer, and insulated materials, etc.

Striving to be the best supplier of high performance polymeric films, We continually strengthen its techniques on research, development and production, persistently producing high value-added product while building up strategic alliance with related industries and individual companies outstanding in their respective fields. We will reinforce its logistics and distribution system that focus on the global market to keep the latest market status for achieving just-in-time supplies and fast after-sales service aiming at being an international partner, not just a domestic vendor.