Specifications

epoxy fiberglass tube
1.High mechanical properties
2.High oil resistance
3.Wall thickness: 1.0-300mm

Epoxy Fiberglass Tube

 

Epoxy Tube
Outer Diameter (mm)	10mm—1400mm
Inner Diameter(mm)	5mm---1200mm
Wall thickness (mm)	1mm---50mm
Length (mm)	450mm---1600mm

 

 

 

 

 

 

 

I. Description

This laminated product is formed through heat pressing after electric industry alkali glass cloth dips into the epoxy phenolic resin. It has high mechanic and dielectric performance, and applicable as insulation structural components for electromechanical/electrical equipment, as well as used under damp environmental conditions and transformer oil.

 II. Technical requirement for surface

The surface of laminated board should be flat and smooth, no bubble, no wrinkle, no delamination or crackle, and properly free from other defects such as scrape, impress, dirty spot and uneven color, but a little color patches is allowed.

 

III. Characteristics

♦ High mechanical properties, and oil resistance and certain dielectric property.

♦ Temperature resistance: 150 °C

♦ Withstand a variety of chemical solvents and acid erosion

 

VI. Application

 Chemical machine parts , general machine parts and gear ,and generators, Pads, base, baffle etc..Generator ,transformer, fixture, inverter, motor and electric insulation component.

 

 Product Characteristics

 

Main advantages
- compressing and assisting tool            - Precision and automate equipment (600pcs/hr)
- Reduce cost                           - Tube can be compressed, the other material can reuse.
- Excellent electricity design               - UL registered material (NFW -G-10)

Other feature
- Flexible design and size                   - Simple design and save time
- Lead time is only 4~6 weeks if reassemble.   - Reduce changing time
- No storage time limited (The storage molding material is 60-120 days)
- Low power                             - Environmental

 

Property

 

- Electrical application
- Dielectric withstands 14kV/mm             -Longitudinal strength: 144MPa
- 5000 V high voltage test for 6 seconds.       - Water absorption is less than 0.1% in 24 hours                      

- Density hits 1.85 g/m3                    - Volume resistivity:10¹⁵

- Softening point: 240°C                    - NFW-G-10
- Insulation grade H                        - Min thickness:0.074 mm
- Temperature: 180°C                       - UL 94 Flammability is 94HB

- Standard tolerance

 - ID: ±0.0010” ±0.025mm        - length±0.010” ±0.25mm
 - OD±0.0005” ±0.0125mm         - Concentricity: (TIR) 0.004” 0.10mm

 

Application

 

 Chemical machine parts , general machine parts and gear ,and generators, Pads, base, baffle etc..Generator ,transformer, fixture, inverter, motor and electric insulation component.

 

 

WHO WE ARE

Our policy is to achieve customers' satisfaction both by providing them with high level product quality and services that meet or exceed their expectation. Our aim is to ensure that our clients continue to put their faith in us for many years to come.

 

ABOUT US

OUR THINKING

We truly believe in long term relationship with our clients and our motto is customer satisfaction. We always believe in supplying best quality products at most reasonable price. 

OUR GOALS

High Quality - We put every effort to provide products for our customers with highest standards of value, quality, service and integrity.

Employee Safety - Employees are valuable assets of any good company. Therefore our endeavour is to provide a safe and healthy work environment for our employees.

 

Environmental protection - We care for environment and our facility work in an environmental friendly manner.

 

On Time Delivery - We deliver when we promise!