Glare cycle technique brief introduction: Australia is the country devoting much attention to reduce energy and protect environment, the federal government gives energetic support to the products reducing energy and protecting environment. Glare cycle is the research item of environmental project led by the professor Glare of Melbourne University subsidized by government. This research lasted 5 years and achieved success at last through study and study. The thesis published in Melbourne University journal and international professional institute in 1986 arouses the regards of heat work refrigeration industry. This cycle system differs from the regular refrigeration KaNuo cycle, which has four cycle processes, as compressing, throttling, vaporization and condensation, while the processes of Glare cycle system is up to 12, in which some special cycle processes are pioneering work of the refrigeration cycle. It can ensure that the assignment and the transfer process of energy is reasonable; the use factor of energy is up to 95.53%; the capability and the efficiency proportion (COP) is up to 6.33 ( heating water test work condition). The ambient temperature for use is down to -30°C. Under the condition that the ambient temperature is -30°C, this unit can heat the water to 80°C (here the COP is 2.5). This technique obtains the special award of applying project of Mebourne University, the first prize of the best project technique invention in Australia in 1990, and the first prize of international heat work institute thesis in 1993. Glare professor gave Australia MoHaLei Group the authority to manufacture Glare heat pump/heat water unit. MoHaLei Group set up Environment Energy Engineering Company specially. From 1988 to 2004, it has had ten thousands units running in Australia and all around the world. This company\'\'s founder-member is Mr. Haien who is the president of Environment Energy Engineering Company, the subcompany of MoHaLei Group. Mr. Haien has started to study market need around the whole world from 2003, and the conclusion is that the Chinese market has great potentialities, so he decided to set up the base for production in China. In 2005, he made sure that the address of the base for production in China is Shanghai, and provided set of technical information and drawing in advance. He starts to develop and design the Chinese environment applying unit through the development center in China, and then products the unit fit for Chinese environment. Charge account: 1) Annual daily average heating: 120MT water (from 20°C to 60°C) 2) Running 9 months annually 3) Daily energy consumption: 120MT x 1,000 x 40 = 4,800,000 kilocalorie 4) Account comparison between fuel and Glare water heating unit: a) Fuel water heating unit: i) Fuel heat value: 10,300 kilocalorie x 60% = 6,180 kilocalorie ii) Daily energy consumption: 4,800,000/10,000/0.65 = 738kg iii) Heat water transmission consumption (account at 1.5 times): 738 x 1.5 = 1,108kg iv) Charge: aa) Light diesel oil: USD591.862/MT bb) 0.137 x 591.862 x 3.699 x 1.110 = USD177,061.406 b) Glare water heating unit: i) 4,800,000/4/1.16=1,392kWh ii) Heat water transmission consumption (account at 1.5 times): 1,392 x 1.5 = 2,088kW iii) Electricity price: USD0.037/degree, 257.460 x 0.037 x 3.699 x 1.110 = USD20,854.254 Equipment collocation: 1) 25HP Glare water heating unit: 6 units 2) Input power/unit: 20kW 3) Produce 6040°C heat water (40°C temperature up): 1,650kg/hour 4) Max. heat water production: 1,650 x 6 = 9,900kg/hour 5) Max. daily heat water production: 210MT/day