E1-V.35 convertor provide conversion between ITU-T G.703 standard E1 interface and standard V.35 interface, can receive synchronous 2.048 Mbps data, transfer it to router, DDN, multiplexer or other devices. Provides safe and seamless connection between different devices with different interfaces. Used widely in connecting WAN and LAN, video monitor. Data interface is DCE, connnect with DTE or DCE. The main E1 link may be clocked from the recovered receive clock (LBT), from the data port, or from an internal oscillator. The G.703 port provides for either 75 Ohm unbalanced connection via BNC connectors or 120 Ohm balanced connection via RJ-45/48. The AN-E1-V35/V24 DIP and slide switches, located on the front panel, provide for easy setup and control of all functions. - Based on self -copyright IC, main chip self-copyright. - Match ITU-T V.35, G.703 Standard. - Provide E1 interface option:75 Ohm unbalance and 120 Ohm balance. - V.35 support hot plug. - V.35 interface have multi clock and timing for option. - Provide 4 clock types: E1 master V.35/V.24 external or internal, E1 slave V.35/V.24 external or internal. - V.35/V.24 interface can connected with other DCE equipments. - provide 2 loop functions: E1 local loop, V.35 local loop. - Power supply option: AC220V, DC-48V, +24V. The positive and negative terminal can be exchanged for DC-48V, +24V, easy for installation and maintenance. - Have pseudo random code test function, easy the installation and maintenance. - Working clock can support inter-clock, external-clock, and line clock. - Network manager uses SNMP. AN-E1-V35/AC E1-V35 interface convertor,75/120,220V AN-E1-V35/DC48 E1-V35 interface convertor,75/120, DC-48V AN-E1-V35/DC24 E1-V35 interface convertor,75/120, DC+24V