Termination boxes are suitable for jointing fiber with fiber pigtail and protect fiber optic splices and help to distribute. The termination box is either a wall-mounting type or a desktop type, mainly used in telecommunication equipment room and network equipment room. The housing of GP-A, B, C termination box is made of quality metal. The material has excellent mechanical strength. It is of nice shape and appearance with electro-static spray painting. SLIDE-N-LOCK fiber optic splice tray with its opening angle above 90degrees makes it easy to install and expand and maintain. GP-C is equipped with adaptor panel. The adapter panel makes it easy to install, inspect and test. The internal storage structure allows storing fiber and fiber pigtail, as well as storing excess active connector of fiber pigtail, therefore it is easy for capacity expansion. The structure of GP-D is innovative, designed in up-down bisection. Its installation is quite simple. By untightening one piece of fixing nut, it succeeds in opening the housing and it allows fiber cable and fiber pigtail to pass in and out in single side. The termination box is made of high-strength polycarbonate plastic materials, which has mechanical strength, therefore it is reliable and long lasting. It is of nice shape and beautiful appearance. SLIDE-N-LOCK fiber optic splice tray (FOST) with its opening angle above 90 degrees; makes it easy for installation and maintenance. The elastic material is used to fix fiber pigtail. When distribution of fiber pigtail can not be determined (it is not used for the moment), it is possible to wind fiber pigtail into clasp. Whenever it is needed, the active connector could be installed outside of the housing, therefore it can connect termination equipment without connecting adapters.