Application Directions:  Heat at 300 - 360 degrees for 15 - 20 seconds, medium pressure.  Peel cold. Wash Instructions:  Temperatures up to 180F degrees inside out.

1). Engraving: cut the reflective transfer films into the shape of what you need, tear the film of outside the pattern, cut the depth (specification: cut into the underlying glue 10~30um, the pressure is preferred 160~170 GF )

2). Heating: bring a jaconet attaching the heat press machine, then heated it.

3). Transfer printing: The pressure of heat press machine is 4 KG. It must make sure the table-board being horizontal. The temperature of the plate and the current temperature must be same. Setting temperature and time must be according to the melting point and fabric. Always using 150℃, 15s

Application:

Available for T-shirts, work clothes, jackets, and running & bicycling outfits. Heat-transfer (iron-on) Red tape reflects bright white at night. Fluorescent colors are not as bright but offer great daytime conspicuity in foggy conditions. These tapes are absolutely great for T-shirts and can easily be cut into shapes and stripes and be arranged to form patterns and images.