NF70 70*170*110mm Freewheel Roller Clutch One Way Bearings

NF70: bore sizes: 70mm

             outer diameter: 170mm

                 width: 110mm

NF production introduction:

Type NF is a roller type freewheel non-bearing supported. Bearings are required to support axial  and radial loads. Lubrication and sealing must also be provided by the installation. Standard lubrication is oil.

Nominal outside dia-meter is a standard ball bearing dimension.

A typical arrangement is to install this type alongside a bearing with the same housing tolerances, .

The inner race is keyed to the shaft. The outer race has a positive n6 tolerance to give a press fit in a H7  housing. Additional side notches provide for positive torque  transmission. If the housing tolerance is to K6, use of the notches is not necessary, but the housing must be strong enough to not expand after assembly.

Datasheet

Contact information

Changsha Terry Machinery Co.,Ltd

ATTN: Emily

E-mail: emily @ntl-bearing.com

Skype: Emily Cosmic

Mobile: 0731-85782665

                                                 Welcome to enquire for more details!