Product Details

MZ60-55 One way clutchbearing/ sprag clutch bearing for conveying machinery

The MZ series CAM clutch is equipped with anti-dust bearing at both ends, which has been injected with special grease, which need not be lubricated when used.

Cooperate with pulley, gear or sprocket, insert the clutch pulley, gear or sprocket holes (with the JIS standard grade f6 tolerance) and bolt (high tensile strength) end of the screwing in clutch tooth hole to tighten.

External loads are supported by other devices and cannot be directly applied to the CAM clutch.

The coupling of the clutch to the shaft only USES the flat key. Do not use cone key.

When the clutch is installed on the shaft, the thrust should be applied to the inner ring of the clutch. Do not apply to the outer ring.

This series of CAM clutch working environment temperature: - 5 ℃ to 40 ℃,

It can also design and manufacture non-standard clutch according to user's requirement.

A one-way clutch is a precision device that can drive torque in one direction and overspeed in the opposite direction.It has three basic functions to deal with beyond operation, reverse braking and separation operation.

Application:

The above clutch of MZ series is widely used in metallurgical machinery, rolled steel machinery, hoist, conveying equipment.

Model	Max.Torque	Max.Overrunning		A	B	C	D	E(m6)	F	G	S	Mass(kg)
	(N.M)	Inner Race	Outer Race
MZ15	186	1800	900	62	68	60	58	47	25	5.5	10	1.4
MZ17	215	1700	800	66	75	64	64	52	28	6.3	10	1.8
MZ20	323	1600	700	67	80	65	68	55	30	7.6	12	2
MZ30-22	735	1500	500	82	100	80	88	75	45	8.9	16	3.7
MZ30-25
MZ30
MZ35	1080	1400	300	87	110	85	95	80	50	8.7	16	4.8
MZ45-40	1620	1400	300	92	125	90	110	95	60	8.4	16	6.2
MZ45
MZ60-50	2710		250	102	155	100	140	125	80	9.1	16	10.2
MZ60-55
MZ60
MZ70-65	3040	1100	250	105	175	103	145	145	95	8.6	16	13.2

If you are interested in this product, please contact me freely.

Attn:connie

email:connie at

whatsapp:+8615073676619

wechat:empty919