Ultra-Portable Virtual Projection Laser Keyboard Wireless Bluetooth 2.0 USB for HID Super Full Key for XP/vista/7/ 8/IOS/Iphone
USD $32.26 - $35 /Piece
Min.Order:10 Pieces
Shenzhen Capital Electronics Co., Ltd.
Caution:
Although this equipment is classified as Class 2 laser product, for your safety, do not directly expose your eyes to pattern projection beams orinfrared rays.
1. For safety reasons, be sure to use only the microUSB to USB cable specified for this product.
2. Make sure to fully charge the battery before using the product for the first time.
3. Battery charging times may vary slightly depending on the ambient temperature.
4. The battery may not be charged to 100 percent of its rated cell capacity even when the charging indicate LED goes out.
5. Using or storing the battery in high temperature, humidity and pressure environments may cause the battery to explode.
6. Since the battery is a consumable item, its storage capacity decreases gradually as time passes.
Connecting via Bluetooth:
Connection via Bluetooth HID does not require installation of separate driver as long as the host device has HID compatibility.
Bluetooth 2.1 or higher required for connecting to some devices
Note:Projection Keyboard will automatically attempt to re-connect to the recently connected devices. If no previous device is found then it will listen for a new connection with any available HID compatible device.
Bluetooth HID Compatible Devices:
iOS4 and later
Android 2.0 and later
Windows XP/Vista/7/8 or higher
Windows Phone 7/8 or higher
Mac OS (using Keyboard only)
Blackberry 10
PS3
Bluetooth Connection Instruction:
1. Power on Projection Keyboard
2. Left blue LED will be blinking indicating the Projection Keyboard is searching for a new device or previously paired devices within its proximity . Projection Keyboard will automatically attempt to re-connect to the recently connected devices
3. On primary device,go to Bluetooth setting;search for Bluetooth devices.
4. When the device discovers “Laser projection keyboard”,tap to connect.
5. Upon successful pairing, the LED will stop blinking and go out.