Professional Auto Repair Tool Kit;hand tool/car repair tool kit/auto body repair tools.

1. insert the hot melt adhesive from the rear of the Glue gun and pull the trigger several, let the glue stick enter thoroughly.

2. insert the Glue gun into the power outlet, preheat 3-5 minutes, let the hot melt melt thoroughly.
3. select the appropriate traction gasket according to the diameter of the dent, and pull the trigger of the Glue gun, fill the gasket with the melted jiaotu.
4. align the traction gasket with hot melt adhesive at the center of the depression and press firmly with your hand.
5. after 3-5 minutes, align the center hole of the laliqiao with the shaft of the traction shim, set well.
6. the yongluo sixuan is on the luosizhou of the traction gasket, slowly tighten, until the sag portion is repaired.
7. if the dent is not ideal, you can repeat the steps until the dent is intact.
8. if the diameter of the depression is large, repair from the periphery of the depression, and repeat the repair steps clockwise until the center of the depression is repaired.