Product Details

Industrial PoE(PSE) 10/100/1000Base-TX to 1000Base-X SFP Media Converter

Model: LNK-POE1000SFP Series

Overview

LNK-POE1000SFP series is a 10/100/1000Base-TX to 1000Base-X SFP (also can be forced to 100Base-FX) media converter, which allows two types of network segment to be connected easily. Complied with IEEE802.3at or IEEE802.3af standard, the AC/DC powered PoE media converter is a Power Sourcing Equipment (PSE) which combines data transfered over a fiber optic link with 48V (or other voltage) power supply, providing power to IEEE802.3at or IEEE802.3af powered device (PD) over CAT5e/CAT6 UTP cable (cable length up to 100meters / 330feets). The converter includes a single port PSE controller, which offers PD signature sensing and power monitoring features. Other features include over-current protection, LFP function, etc. The LFP (Link Fault Pass-through) allows the media converter to monitor both the fiber and copper RX port for loss of signal. In case of a loss of RX signal on one media port, the converter will automatically disable the TX signal to the other media port, thus passing through the link fault.

Features

10/100/1000Base-TX UTP to 1000Base-X SFP fiber media conversion
IEEE802.3at / IEEE802.3af PoE PSE compatible
Built-in AC/DC power supply
Over-current protection
Supports external 1000Base-X SFP
DIP switch to set different configurations
LFP (Link Fault Pass-through) support
DIN mounted.

Technical Indexes

Data Rates	10/100/1000Mbps(IEEE802.3U IEEE802.3z 1000Base-Tx)
Data Rates	1000Mbps (1000Base-FX) or 100Mbps (100Base-FX)
Input Power Requirements
Input voltage	100 VAC to 240 VAC or 48DC
Input frequency	47 Hz to 63 Hz
Power over Ethernet Output
Pin Assignment and Polarity
For IEEE802.3af standard	1/2 (V+),3/6 (V-)
For IEEE802.3at standard (30watts maximum)	1/2 (V+),3/6 (V-)
For IEEE802.3at standard (50watts maximum)	1/2/4/5 (V+),3/6/7/8 (V-)
Output Power	please refer to ordering information
Efficiency	75% min
Short circuit protection	auto recovery
Over current protection	auto recovery
Environmental Conditions
Operating temperature	-20℃ to 70℃
Cooling	free air convection
Storage temperature	-40℃ to +85℃
Operating Humidity	90% max, non-condensing
Mechanical Specifications
Case Material	Iron
Case Color	Black
Net Weight	560g approx. / unit
Dimensions	110(W) x 40(H) x 140(L) (mm)
Do not include transceiver length
Connectors
AC Inlet	IEC-J-4
LAN	Shielded RJ-45
Fiber	see ordering information

*Specifications subject to change without notice.

Ordering Information:

Part Number	Supported Standard	Output Voltage	Output Current	Output Power	Remark
LNK-POE1000S-XX-XXX	IEEE 802.3af	48V	0.35A max	15.4W max	default
LNK-POE1000-XX-XXX	IEEE 802.3af	48V	0.54A max	25W max	default
LNK-POE1000T-XX-XXX	IEEE 802.3at	52V	0.60A max	30W max	default
LNK-POE1000H-XX-XXX	IEEE 802.3at	52V	1.00A max	50W max	default
LNK-POE1000B-XX-XXX	Non-standard	48V	0.60A max	30W max	optional
LNK-POE1000C-XX-XXX	Non-standard	24V	1.20A max	30W max	optional

*XX-XXX: supports optic connector / fiber type and distance. For more details, please refer to the list below or contact us.

Suffix	Description	Suffix	Description
SFP-M005	LC/SFP, Multi-Mode, 550m , 850nm	SFP-S20	LC/SFP, Single-Mode, 20km , 1310nm
SFP-S10	LC/SFP, Single-Mode, 10km , 1310nm	SFP-S40	LC/SFP, Single-Mode, 40km , 1310nm