Specifications

Products Details:

1. Description :  
PVC-coated glove on Interlock cotton support, length: 40 cm. 
   

2. Materials:  
Glove: 100% red PVC vulcanized and coated on Interlock cotton support. 
Thickness : 1.20 -1,40 mm
 

3. Instructions for use:  
Protective glove against mechanical risks designed for general use against chemical hazards, micro-organisms (bacteria,
fungi), water and airtight, with no danger of electrical or thermal risks.  
4. Limits to use: 
Do not use this glove of the scope of use defined in the instructions above. This glove does not contain substance known as
being carcinogenic, neither toxic, nor likely to cause allergies to the sensitive people. Before using these gloves, check that
they are intact. Replace if necessary.  
 
5. Instructions for storage: 
Keep in its original packing away from light and humidity.  
 
6. Instructions for cleaning / maintenance: 
No specific cleaning or maintenance for this type of glove.  
 
7. Performances :  
The levels are obtained on the palm of the glove. They are in increasing levels of performance (from 0 to 4, 5 or 6). 0
indicates that the glove has a lower performance level than the minimum for the individual hazard given. X: indicates that the
glove has not been subjected to testing or the test method is not suitable due to the design of the gloves or the material.
-Abrasion (from 0 to 4): Ability of the glove to withstand wear
-Cutting (from 0 to 5): Ability of the glove to withstand cutting 
-Tearing (from 0 to 4): Ability of the glove to withstand tearing 
-Puncture (from 0 to 4): Ability of the glove to withstand puncture 
-Dexterity (from 0 to 5): Manual ability to accomplish a task
-Penetration (from 1 to 3): Diffusion, at a molecular scale, of a chemical product and/or a micro-organism through porosities,
seams, micro-holes or other imperfections presents in the protective glove material. 
-Permeation (from 0 to 6): Process by which a chemical product diffuses through the material of a protective glove, at the
molecular scale. 

The higher the performance, the greater the ability of the glove to withstand the associated risk. Performance levels are
based on the results of laboratory tests, which do not necessarily reflect real conditions in the workplace, due to the influence
of the other various factors such as the temperature, the abrasion, the dissipation...
This glove complies with the European directive 89/686, notably regarding ergonomics, innocuousness, comfort, ventilation
and flexibility, with EN420:2003 (dexterity 5), EN388:2003 (4,1,2,1), EN374-1 :2003, EN374-2:2003 determination of
penetration resistance (level 2, AQL<1,5), EN374-3:2003 levels of permeation from 1 to 6 (A : methanol = 2, K : Sodium
hydroxyde 40% (NaOH ) = 6, L: sulphuric acid (50%) =3).    

Any inquiry from your company is highly appreciated. The above product models are only for your general reference, we can design according to your specific requirement.

We are looking forward to your early inquiries so as to begin our good cooperation

Website: http://sz-huaan.en.china.cn