Product Details

Jinan Manufacturer hobby leather laser cutting machine price MC1325

Related Products


Desktop acrylic laser carving engraving machine price MC1610	150w 180w 260w 300w metal and non-metal laser cutting machine MC 1390

Technical Parameters

Model	MC1325	Option
Working area	1300*2500 mm	According to demands
Laser power	60w/80w/100w/150w/180w for option
Laser type	CO2 Sealed laser tube , 10.6μm
Cooling type	Water cooling
Laser output control	0-100% set by software
Min. engraving size	English letter:1.0mm*1.0mm
Highest scanning precision	4000DPI
Locating accuracy	≤+0.01mm
Controlling software:	DSP control system
Graphic format supported	DST PLT BMP DXF DWG AI LAS,etc
Compatible software	CORELDRAW,PHOTOSHOP, AUTOCAD,etc.
Driving system	3-phase stepper motor and Leadshine Driver
Auxiliary equipment	Exhaust fan, air exhaust pipe, air pump, water pump/water chiller
Power supply	AC110V/220V+10%,50HZ/60HZ
Working environment	Temperature:0-45℃,Humidity 5-95%(No condensate water)
Option configuration	up&down table, worktable, rotary device, red dot position system, auto-focus device

Detailed Images

1. Laser head: stable moving, and promptly adjusting ray path system, blue tube can blow gas to cooling the materials and focus lens.

2. RECI laser tube: More stable laser beam and long life time of laser tube is about 8000-10000 hours under the good environment, could provide stable laser.

3. Driving system: Leadshine brand high subdivision stepper motor, make sure the speed and precision work.

4. Transmission system: FULONG brand high toughness belt as transmission with high stability.

5. Guide Rail: Taiwan HIWIN sauqre guide rail with very long service life and highest precision.

6. Focus Lens and Reflect Mirrors: Imported from Singapore, very high sensitivity, high temperature resistance, no need to be changed often with long life time, reduce the resuming cost.

Auxiliary Parts

1. Water pump: Providing power to circulate water, help to cool the temperature of laser tube, prevent the laser tube from broke up.

2. Air pump: Blowing the laser lens during working to make the laser lens away from dirty environment caused by smoke and dust.

3. Exhaust Fans with air pipe: For exhausting the smoke and some small pieces during the machine working, clean dirty air, with low noise.

4. Tool box: Help to install and maintain machine.

Optional Parts

1. Partial Electrical Up-Down table: It could intelligently adjust up and down in accordance with different thickness of materials, ensuring the best focus height and perfect processing effect.

2. Auto-focusing: Work with electrical the up & down working table, could intelligent adjust the focus distance between the head and materials.

3. Air compressor: Environment Protection, Oil-free, Low noise, Strong high power for cutting Acrylic, Wood, MDF, Leather, Cloth, Card board, Rubber, preventing fire and protecting cutting effect.

4. Cooling system: Can control the temperature automatically. It will alarm if there is a shortage of water thus ensure the continuous work of the laser tube. (CW5000/CW5200/CW6000)

5. Rotary attachment: when need to engrave on the regular or irregular round materials, need to use Roller rotary or Chuck rotary, this accessory must work together with the up & down system.

6. WIFI receiver: could operate the machine through this panel directly.

Machine will be clean and fixed on the wood board, every auxiliary parts will be packed by film, laser tube will set in one independent box , and fixed by sponge.Then,machine will be surrounded by the film and air rubber film,after that, will packed by the standard export plywood.Finally, will surround by the metal line again. The machine will be protected well.

Warranty & Service