Product Details

Multi-function label machine for clothes tshirt heat press machine(ce-approved,12 months'

1.high pressure heat press machine
2.Voltage:220V/50Hz
3.Timing Range:0-999sec.

Heat transfer sheets to be pressed onto all fabric surfaces,

or personalised pictures or photos to be pressed to plane surfaces

1.Printing an image on the general paper
2.Design your picture
3.Choose the right machine according to the shape of goods.
Plain Heat Press Machine:Cloth,T-shirt,hat,etc.
4.Adopt to alnico of the heat board and motherboard, so can heat up equality, level up the surface.
4.Use the machine to sublimate the ink into the good with 180~220 degrees centigrade about 5-10min.
spec:380*380mm/400*600mm/
power:2KW
avoirdupois:25KG
cubage:720*440*390mm

Specification
packing size:450*420*380mm
Net Weight:28Kg
Voltage:220V
Power:1250W
Temperature Range:0-380 C
Timing Range:0-999 Sec.

Accessories
Diameter 30X38cm for Flat

Description
It can imprint T-shirts, Ceramic Tiles, Mouse Pads, Jigsaw Puzzles, Fabrics & Materials, Other Misc.

BestSub Technologies Co., Ltd. Founded in 2000, is a manufacturer specialized in heat press machines, sublimation blanks, photo crystal, corporate gifts, personalized gifts using sublimation technology. We also expand our business line to provide more advertisement equipments relevant to printing line. Now we have been distributors of Pcut and Foison Brand Vinyl Cutters. With nine years' experience, we currently have business links in over 100 countries all over the world and enjoy an excellent reputation in the market.

Site Diagram:

1.Power Plug

2.Power Switch

3.Fuse

4.Temperature Controller

5.Timer

6.Adjust

7.Pressure Adjust

8.Heater

9.Silicon Rubber

Operations:

1Attention: proper and stable protective ground-wire must be prepared for whole machine.

1)Adjust the temperature to requested temperature, which usually between 120°C-200°C.

2) Set the timer to request time which usually between 5s-20s.

3) Put the material on the lower plate then place transfer paper (pay attention on front and back of it), Press handle till the end.

4)Attention: Strength mustn’t exceed thirty kg to protect normal working of handle.

Buzzer is working when timer indicated completion of hot-stamping, then replace the handle.

5)If cold peel thermo printing paper, erase it by brush within five to ten seconds then peel the thermo printing paper.

If hot peel thermo printing paper, erase it immediately after completion of printing.

Perfect thermo-printing requires the cooperation of correct time, temperature and time.

6)Welcome the dealers the entire world to inquire our company for information about thermo-printing

7)All transfer paper must be tested before mass-produce.

Maintenance

1)Pressure: if pressure is insufficient or too strong, adjust the pressure nut."+"means pressure increase while"-"means decrease.

2) Time: if the buzzer doesn’t work or continuously works when time is up, touch contact of micro-switch in after body box must be checked to see if it needs adjusting. If so, adjust it to a suitable position.

3) Temperature: when temperature is up, and it will take approximately 15 minutes to reach 180°C.If heating plate doesn’t work several minutes after operation, please check the circuit.

Our factory sincerity promise: All of the heat transfer films are imported from Korea. we will pay back for you If you get fake heat transfer vinyl from our factory.
Guangzhou Elephant Digital printing Co,.Ltd

Guangzhou Address:Building1 ,Haode Industrial Park, No.70 Xingang East Road,Haizhu District,Guangzhou China

Qingyuan address: Building 7, Dongcheng Industrial Park,No.48 Qingcheng District,Qingyuan,China.1

Digital printing factory Address:Building1 ,Haode Industrial Park, No.58 Haizhu District,Guangzhou China