50ml Stainless Steel Density Cup

The Density of a coating, also known as Density(Specific Gravity)Cups. Pycnometers are used to determine the specific weight per unit volume of a liquid at a given temperature.

This instrument consists of a cylindrical container and cover with a hole for exhaust of excess liquid for any excess Paint(or Ink)to be removed when the cup cover is pressing tightly. By doing so, will also ensure that no air bubbles (or pockets of air) are being trapped.

 It is in according with DIN 53217,ISO 2811,and BS 3900 A19.

Main Technical Parameters

Cup’s diameter: 460mm,  Height: 450mm

1. A stainless steel precision instrument for determining the specific weight of paints and similar products.

2. There are three different size of density cups:

(1) ISO standard size: 100ml volume;

(2) 50ml specific volume;

(3) 37ml volume GB standard size. 

3. A tolerance of 1mg (0.001%) is guaranteed. Testing is carried out in accordance with ISO at 23±2°C.

Procedure:

1. Weigh cleaned density cup empty and record weight
2. Temper density cup and test liquid (20°C ± 0.5°C; 68°F±1.0°F)
3. Fill density cup
4. Put cover on without tilting
5. Avoid air bubbles
6. Remove overflowing liquid carefully with absorbent cloth
7. Weigh filled density cup
8. Calculate density

Related Product 7

You maybe interest below product,click the headline to browse more...

Double Groove Hegman Fineness Gauge	Use For Paint Four Side Wet Film Applicator	Stainless Steel 4 Side Wet Film Applicator Effective Length 160mm
Cube Film Applicator(38um 76um)	Hand Ink Proofer For Flexo Ink Tester	Bending Testing Cylindrical Shaft Bending Device
Cross Cut Adhesion Tester For Paint	Single-groove Hegman Gauge	GB/T 9264 Standard Sagging Tester For Pain
Digital Display BGD186 Krebs Stormer Viscometer	RDS Scrape Ink Bar From United States	GB/T 1727-92 Standard AARON Scraping Ink Rod

 

 

More product welcome to Visit our Website

 

→ RongtaiPacking