jiabao whosalematte pet release film for screen printing

1)product information

Product name: 2185 matte,cool peel release film screen printing(back coating)

Product model:2185

Product specification:48*64cm,(For 50micron:NG.32.3KG/ctn,0.027CBM)

39*54cm(For 50micron:NG.22.5KG/ctn,0.027CBM)

44*60cm,500pcs/bag,2 bags/ctn

Thickness: 50um,70um,,100um(Special specifications can be customized)

2) application manual:

1. Apply to printing:Only suitable for the matte and cool peel of screen printing products.

2. Applicable heat transfer materials: cotton, chemical fiber, cotton blended fabric, EVA, non-woven fabrics, leather and other heat resistant fabric

3.Peeling method: cold peeling  

4. Applicableheat transfer material: water (301, 305 series heat  transfer). Oily (JB W series heat transfer ink, HMA, 529, 530, 531 series heat transfer glue). Weak sublimation offset printing ink, etc.

5. Applicable heat transfer sticker level:A,B,C,D,E,F(According to the Kenteer company standard

3)Products using the matters needing attention

1. before transfer,keep printing substrates clean and tidy;

2. At printing and  production, avoid contact with sharp objects, in order to avoid scratches, impact effect

3. At printing and  production, avoid contact with hot objects

4.When printing,pay attention to the light to take and light put, prevent scratch color printing design;

5. Putting it together should not exceed 20 after printing offset printing products, prevent print the stick.And enter pump suction wet wet room 12 h about 40 ℃,after the offset printing ink drying,then screen printing.

6. This product is applicable to water, oily silk screen printing ink

7.After Silk screen printing baking temperature between 50 ℃ to 65 ℃ advisable, to prevent high temperature lead to slight deformation generates set of bit of film  not accurate

8.Before transfer the image,cut out the other parts of the blank and with 2 mm border.

9.Transfer temperature:130℃-150℃,Trnsfer time:6-15s  Press:20-30 pounds

10. Machine time out, lift or move the machine heating panel, after product cooling tore away from the film, the effect is better. 

)

3)Products using the matters needing attention

1. before transfer,keep printing substrates clean and tidy;

2. At printing and  production, avoid contact with sharp objects, in order to avoid scratches, impact effect

3. At printing and  production, avoid contact with hot objects

4.When printing,pay attention to the light to take and light put, prevent scratch color printing design;

5. Putting it together should not exceed 20 after printing offset printing products, prevent print the stick.And enter pump suction wet wet room 12 h about 40 ℃,after the offset printing ink drying,then screen printing.

6. This product is applicable to water, oily silk screen printing ink