14V6A Switching AC DC power adapter for LED Light strips,CCTV Camera
USD $9.89 - $10.30 /Piece
Min.Order:500 Pieces
Shenzhen Jipu Electronics Co.,LTD.
90-264VAC Power Adapter&Adaptor switching 15V5A for LED Light strips,CCTV Camera
16800mAh Portable Multifunction jump starter with for Car/ smart phone, digital camera, tablet PC
12V24W Power Adapter &Power Supply,100-240VAC Euro plug for LED Light strips,CCTV Camera
18W Switching Power Supply 100-240VAC Conversion plug adapter for LED Light strips,CCTV Camera
15000mAh portable jump starter with for Car/ smart phone, digital camera, tablet PC
UL&Level VI 5V10A Switching Power supply 50W Power Adapter for LEDlighitng/CCTV Cmaera/3D printer
14V6A Switching AC DC power adapter for LED Light strips,CCTV Camera
Features:
Universal Input range: 90-264V/AC
Efficiency to 85%
Continuous short circuit protection
Over voltage/current protection
No load input power:<0.3W
Leakage current:<0.1mA
UL60950-1/EN60950-1 approved
AC inlet: IEC320/C8/C14
Meets CEC and Erp level VI
(Output cable length: ≤1800mm, 18AWG)
Specification: | ||
Model | JYH32-1406000 | |
Output
| Voltage | 14V |
Current | 6A | |
Power (max.) | 64W | |
Ripple & Noise (max.) | 100mVp-p | |
Efficiency | 85% | |
Voltage Tolerance | ±5.0% | |
Line Regulation | ±1.0% | |
Load Regultaion | ±1.0% | |
Setup, Rise Time | 100ms / 115VAC at full load | |
Hold Up Time | 30ms/115VAC at full load | |
Input | VOLTAGE RANGE | 90 ~ 264VAC |
Frequency Range | 47 ~ 63Hz | |
AC Current(max.) | 1.5A/115VAC 1.2A/230VAC | |
Inrush Current(max.) | COLD START 30A/115VAC 60A/230VAC | |
Protection | Over Current | 120% ~ 150% type; TYPE: cut output reset: automatic recovery |
Over Voltage | 120% ~ 150% type; TYPE: cut output reset: automatic recovery | |
Short Circuit | TYPE: cut output reset: automatic recovery | |
Environment | Working Temp. | 0℃ ~ 40℃ |
Working Humidity | 20% ~ 80% R.H non-condensing | |
Storage Temp., Humidity | -20℃ ~ 70℃ 20% ~ 90% R.H | |
Safety &EMC | Dielectric Streng Th Hi-Pot | Primary to secondary:3000Vac 10mA; Primary to shell:1500Vac 10mA; shell to secondary:1500Vac 10mA |
Insulation Resistance | Primary to secondary, Primary to shell, shell to secondary; >100M Ohms / 500VDC | |
Leakage Current | 0.25mA / 240VAC | |
Safety Standards | UL GS SAA KCC BSI PSE CCC | |
EMC Standards | CE EN55022B FCC | |
Green Mode | Noload Power Consumption Less Than 0.3W | |
Others | MTBF | 50000hrs min. MIL-HDBK-217F (25 ) |
Dimensions | 120*60*34.5mm (L*W*H) | |
Weight(Net.) | 165g/pcs |