Galvanized Steel  Water Tank

Technical Specification

1. Design

1.1 Material

The panel is made of Q235 steel by hydraulic punching machine;

The size of the panel is :1220*1220mm, 1000*1000mm,1000*500mm, 500*500mm;

The thickness of the panel mainly includes: 5mm, 4.5mm, 3mm, 2.5mm, 2mm, 1.5mm. It is different according to the tank dimension.

1.2 Flanges

The sectional panels shall be pressed to double flanges at the angles of 45 degree and 90 degree to the face of the plate on four sides.

1.3 Reinforcement Method

All tanks are internally braced with angle stays to endure the rigidity of the tank when filled with the water. The Top panel is supported by top panel support, which shall be made of hot-dipped galvanized material.

2. Accessories

2.1 Bolt. nut & washers

hot-dipped galvanized material.

2.2 Sealing material

Non-toxic P.V.C foam tape shall be used in between the joints.

2.3 Covers

The tank cover shall be constructed from 1.4mm to 3.0mm of thickness hot-dipped galvanized material according to the requirement.

2.4 Ladders and Level Indicator

Internal & external ladder shall be made of hot-dipped galvanized material.