Enamel Steel Combined Water Tank

General Illustration: depending on connection by screw at site
1.Manufacturing standard: manufactured according to Design Atlas 02S101 of the State Construction Standard;
Product features:
1.When combined, the gap between two standard plates is sealed by silicon pad, connected by bolts, and better to prevent the second pollution of the water;
2. Unique & reasonable structure: high tensile punching plate and well distributed stainless steel reinforced cabinet are both under uniform and reasonable pressure;
3.Convenient for construction: standard punching plate 1000*1000mm,1000*500mm,500*500mm, convenient for construction, combined and welded at random, no need lifting equipment;
4. Cabinet light and beautiful: high quality stamping process ensure the maximum pressure need of the tank, reduce the material thickness and meet the beautiful and practical requirements of the tank. Assembly Enamel Steel Water Tank takes advanced crafts, high quality material, by sintering enamel in high temperature, to form a dense glaze layer on the surface of water tank plate, and mutually seep among the steel molecular, mixed to form about 200-300mm thick diffusion layer, which increase the adhesive strength of enamel.
The enamel surface is smooth, easy to clean and corrosion-resistance, steel assembly structure deformed uneasily, strong anti-seismic, anti strong impact,acid and alkali resistance, corrosion resistance.
 
Manufacturing standard:
manufactured according to Design Atlas 02S101 of the State Construction Standard.
Material selection:adopts Q235 steel, drilling around, treated by sintering enamel in high temperature.
Application:
This water tank is widely used in various industries, civil water supply, HVAC, firefighting, food, beverage, vintage, water treatment, medicine, petroleum, chemical and so on. Taking flexible, reasonable plate design, suitable for all sizes combined water tank.
 
Product features:
Adopts Q235 steel, by sintering enamel in high temperature, to form a dense glaze layer on the surface of water tank plate, and mutually seep among the steel molecular, mixed to form about 200-300mm thick diffusion layer, which increase the adhesive strength of enamel.
The enamel surface is smooth, easy to clean and corrosion-resistance, steel assembly structure deformed uneasily, strong anti-seismic, anti strong impact,acid and alkali resistance,corrosion resistance.
Cabinet light and beautiful: high quality stamping process ensure the maximum pressure need of the tank, reduce the material thickness and meet the beautiful and practical requirements of the tank.

Combined at site. When combined, the gap between two standard plates is sealed by silicon pad, connected by bolts.
Installation Instructions:
1.Water tank foundation requires the geometry dimensions of concrete foundation should follow relative stipulations of GB02S101 to be made. The height tolerance of the concrete foundation flat is <5mm.
2.Water Tank Installation:
Construction and Acceptance: professional welders weld by argon arc welding at site;
With standard power in construction field;
Around the water tank , there are intervals ≥500mm for inspection;
visual inspection: no rust, no pollution; cabinet without obvious deformation, weld without leakage;
Meet all above mentioned conditions is qualified.
3. Water Tank Usage, repair and maintenance:
When match the pipe, please don't put excessive pressure on both inlet and outlet of the pipe;
Don't put the weight of valve and large diameter pipe on the tank outlet. If necessary, please set pipe support or lifting support;
For the expansion, contraction and vibration the welded pipe , ,please must install stretched flexible connectors.
4.Water tank allocation and accessories:
The supplying scope of our water tank mainly includes: cabinet, maintenance hole with lock, ladder, short pipe and single flange.

Water Tank Installation, Construction and Acceptance:

1.Specification professional screw connection process on site;

2.Standard power need at construction site. Interval ≥500mm need for both inspection and operation on six-side of the water tank;

3. No rust, no pollution for visual inspection, full water test 2-4h, cabinet without obvious deformation, no leakage for the welding joint, as be qualified.
Water tank Usage, Repair and Maintenance:

1.When connect the pipe, please don't put excessive pressure on both inlet and outlet of the pipe;

2. Don't put the weight of valve and large diameter pipe on the tank outlet. When connect, please set pipe support or lifting support;
3. When the welded pipe expand, contract and vibrate, ,please must install stretched flexible connectors;

4.Water tank allocation and accessories:

cabinet, HDG U-steel base, organic glass tube level gauge, maintenance hole with lock, ladders for both inner and outer of the cabinet, short pipe and flange for cabinet.

Corrosion prevention:

Cabinet and its inside accessories both take enamel processing.

Note:

ls, buildings, restaurants,research and teachingbuildings,offices,agencies, military units, villa, residential quarters, entertainment and other public buildings, medical and health care, food processing and othersecondary water supplyplaces.

Coating color: standard color is grass green or compound according to customer' enamel steeltanksmanufactured by our company use Q235steel ,surfaceadopt a dedicatedhigh-qualityenamelwith thickness of 1.5mm-2mm, by sintering enamel in high temperature, to form a dense glaze layer on the surface of water tank plate, and mutually seep among the steel molecular, mixed to form about 200-300mm thick diffusion layer, which increase the adhesive strength of enamel.

Color selectiondiversity,freedom ofdeployment, colorfulappearanceand free, made by high temperature sintering after several multi-channel pre-treatment and coating process,

and after a specialsurface treatment process.

The strength is twice of the ordinary steel, to spray 2 to 3 layer steel enamel on both inside and outside of the steel, to dry by more than 900ºC high temperature sintering and make the coating permeability polymer, generate strong adhesive force between steel and enamel. Enamel steel can be assembled into various containers for both liquid and solid.

The enamel surface is wearable, without scratch during using and cleaning; Green, environmental protection, no harm to human body;

Appearance: beautiful color, elegant.

Enamel steeltankcan be widelyused in hotes requirement

Coating thinckness:0.25-0.45mm

(Both sides) coating expansion ratio:295-355

Tensile strength:7-9mpa

Density:2.5-2.8g/cm2

Moh's hardness:6.2 (Moh's Hardness tester)

Modulus of elasticity:6000-6500

Gloss:95-115

Adhesive force: 3.450N/cm

Suitable PH value for standard coating is 3-11

Suitable PH value for special coating is 1-14

Using life is ≥30 years

 We can offer different sizes of water tank with high quality and competitive price .  Our main products includes  FRP water tank ,Stainless steel water tank ,hot galvanized water tank and  Enameled  water tank  .