Factory price!! Dezhou Huili sectional panel BDF underground water storage tank

sectional panel underground water tank

Keywords to search Huili water tank:

SMC/FRP/GRP water tank

Stainless steel water tank

Enameled water tank

Hot dip galvanised water tank

gush-paint water tank

BDF/CSB Underground water tank

All of water tank  can add thermal insulation layer

Brief Introduction 

 The BDF is the latest product of our company. The board is the center 

of the technical innovation, which inside use the SS304 and outside use 

the hot dip galvanized steel.This is perfect combination of the advantage 

of the stainless steel water tank and hot dip galvanized steel water tank. 

Application

1.Industrial and civil buildings and water storage of living cold water, hot water, fire water, the system expansion condensation water tank.

2.Water treatment industry among the original water tank,clean water tank, the sewage treatment tank of environmental protection equipment .

3.Food and beverage, medicine, chemical industry reservoir, supplement, heat preservation water tank on boiler industry.

4.Solar energy heat pump, air and other ancillary heat with heat preservation water tank.

Advantages

1. Possessing the function of the stainless steel water tank .

2.The panel thickness is only two types:2.8# and 3.4# .

3.The cover can be the hot dip steel board which can furthest limit your cost.

4.Imported material,never rust.

5.Choose import food grade stainless steel plate, corrosion resistance is strong, and can effectively reflect the sun's rays, not long moss, keep the water clean.

6.Light weight. Weight is only about a third of ordinary steel water tank.

7.Low price with stamping process type forming process,the haracteristicplate type,with the minimum consumption of materials to achieve high strength requirements. the price is close to ordinary steel tank.

8.Unique structural design. It will never leak, welding, high intensity, and It is different withbolt structure , eliminating the sealing strip, won't appear the phenomenon of leakage and untight seal .

Assembling and check

1.There needs to Keep a maintenance channel which width no less than 700mm betwteen 

the vertical wall and water tank, and between horizontal wall and water tank body no less 

than 500mm.

2.When construction, finish concrete foundation first, make sure all slab joints and the 

surrounding of the water tank is located on the support.

3.When finished assembled, turn off the The outlet pipe and a drain pipefirst, then turn on 

the inlet pipe, as water as examine to fill with water, no leakage in 24 hours is qualified.

 Accessaries

1 Bolt. nut & washers

Option: hot-dipped galvanized material/stainless steel SS304.

2 Sealing material

Sealing material have Rubber strip EPDM, glass cement.

3 Covers

The tank cover shall be constructed from 1.4mm to 3.0mm of thickness hot-dipped galvanized material according to the requirement.

4 Ladders and Level Indicator  

Internal & external ladder shall be made of hot-dipped galvanized material/stainless steel SS304.

Certification

Package ang delivery